Chris and all,
This is another one of those subjects that come up from time to time - and
each time, the answer is -- Don't Worry -- Even if that VERY short varactor
leg is connected inside (unlikely, but I don't really know), the insulation
afforded by the RF Board masking is sufficient to provid
You almost gave me a heart attack; I had just finished putting the
SV149s in #4768 this morning. I snugged them down tight to the board. So
I ran off to the bench and checked with the meter, but all mine are fine.
I had assumed that the middle leg was just something left over from a
manufactur
Today I soldered the 6 MV209 varactor diodes and the 11 1SV149 's on the
RF-board of my K2 #4654 According to the text on page 50 the varactor diodes
should be pressed all the way down on the board to prevent stray signal
coupling. The SV149 varactors may have a center lead that has been cut flu
3 matches
Mail list logo