Re: [Elecraft] {P3] resale value

Jerry. It's only worth what you are willing to pay. Making sure you get the cables shouldn't be a big problem. Otherwise I've not heard of many (if any) issues with P3 units since its introduction. And there isn't much to "tinker" with. Elecraft gear is pretty solid and does seem to hold

[Elecraft] {P3] resale value

Is it realistic for used P3s to sell for 80% of retail value when they don't have a warranty, you don't know if they've been tinkered with, you don't know if they are 100%, and the possibility of not getting a cable or part that comes with it when you purchase NIB? I'm in the market for P3 but

[Elecraft] P3 with SVGA SOLD

The P3 I listed here is now sold. 73 to all. Steve N4LQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] P3: "Error initializing device" on external SVGA

Oh gosh, you are correct, Vic. Thank you. I didn't even realize I had anything plugged in there! Problem solved. 73, Ken WA8JXM On 5/17/16 2:35 PM, Vic Rosenthal wrote: I believe it is referring to the device plugged into the USB port on the P3's SVGA card. Vic 4X6GP

Re: [Elecraft] P3: "Error initializing device" on external SVGA

I believe it is referring to the device plugged into the USB port on the P3's SVGA card. Vic 4X6GP > On 17 May 2016, at 8:09 PM, Ken wrote: > > Any suggestions on how to fix this error? It shows on the SVGA. I have used > this monitor before. > > tnx, > Ken WA8JXM >

[Elecraft] P3: "Error initializing device" on external SVGA

Any suggestions on how to fix this error? It shows on the SVGA. I have used this monitor before. tnx, Ken WA8JXM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] P3 SVGA problem

Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nr4c Sent: Sunday, May 15, 2016 12:03 PM To: Bill Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 SVGA problem I suppose. But the monitor is what most users wanted in the beginning and more recent features weren't

Re: [Elecraft] P3 SVGA problem

I suppose. But the monitor is what most users wanted in the beginning and more recent features weren't even in their dreams when the manual was written Sent from my iPhone ...nr4c. bill > On May 15, 2016, at 10:21 AM, Bill wrote: > > Never mind - got help to move things

Re: [Elecraft] P3 SVGA problem

Never mind - got help to move things around and plugged a monitor into the SVGA port. All fixed. Too bad the instruction manual never explicitly state that requirement. Would have saved hours of time and effort. Bill W2BLC K-Line __

Re: [Elecraft] P3 SVGA problem

Hi Bill, No, no external monitor is used...  You should see a message pop up on the P3 screen, indicating a USB device has been plugged in, when you plug in a keyboard.  If this does not happen, and you are sure you are using a dumb keyboard, not a multimedia keyboard, then something is either not

[Elecraft] P3 SVGA problem

I installed the SVGA board in my P3 and am unable to access the terminal mode. In effect, the P3 operates as it always did prior to the SVGA installation - nothing is new. I have installed the latest firmware - for the entire station. I only bought the SVGA for macro uses - hence, did not

[Elecraft] P3 behaviour

t@mailman.qth.net> >Subject: [Elecraft] P3 behaviour >Message-ID: <khe6jb9rhin28cnu9vfe9bibkm4t3bq...@4ax.com> >Content-Type: text/plain; charset=us-ascii > >I've changed monitors on my P3 and everything is going well except >that for some reason when I tune across the bands, the

[Elecraft] P3 behaviour

I've changed monitors on my P3 and everything is going well except that for some reason when I tune across the bands, the monitor display moves very fast when turning the main VFO across the bands. I know I'm missing something, but Ive spent the last two days trying to find why this is happening

Re: [Elecraft] P3 and Noise Cancelling RX ants system

That is what I figured. We are going to install one at the club station and I just wanted to be sure. Thanks Rich On 5/7/2016 0:24 AM, Vic Rosenthal wrote: Sure. I had an NCC1 and I could see noise and signals go up and down on my P3 as I adjusted it. Vic 4X6GP On 7 May 2016, at 5:39

Re: [Elecraft] P3 and Noise Cancelling RX ants system

Sure. I had an NCC1 and I could see noise and signals go up and down on my P3 as I adjusted it. Vic 4X6GP > On 7 May 2016, at 5:39 AM, Rich wrote: > > I wondering if you can watch the noise diminish/increase on the P3 when you > adjust one of the RX antenna noise

[Elecraft] P3 and Noise Cancelling RX ants system

I wondering if you can watch the noise diminish/increase on the P3 when you adjust one of the RX antenna noise cancelling systems. In particular the DXE NCC1. I would think you could watch the P3 display as an aid while tweaking the knobs. Or am I all wet? Rich K3RWN

Re: [Elecraft] P3 Pre-purchase questions

There is an option for all P3's to feed the video to a large monitor. It's called SVGA and may provide a keyboard connection as well. Recently, a TX power monitor option was announced. I don't have either. I bought my P3 primarily as a "toy," I thought it would be cool to be able to see

Re: [Elecraft] P3 Pre-purchase questions

There are some options available for the P3 including a power/SWR meter and an external monitor output (called the SVGA option). These can be retrofitted to all P3s. In general, Elecraft leans over backwards to make upgrade kits available for older models. See their web site to check if there

[Elecraft] P3 Pre-purchase questions

I'm looking to buy a P3 to go with my K3s. Are the older P3's the same as the new ones or are there different hardware versions? I'm noticing some used P3's being offered recently for almost the same as new direct from Elecraft. Thanks in advance. Jer/AE4PB Sent from my iPad

Re: [Elecraft] P3 Display of split

If you don't have the latest P3 software, this may be the cause...  There was an issue when stacking macros, whereby a macro failed in interesting and odd ways depending-- on the previous macro command...   They would work fine if executed in the MACRO editor Elecraft provides, as long as you did

Re: [Elecraft] P3 Display of split

Hi Tony, I use this macro for split and it works for me: BW0001;SWT13;SWT13;FT1;UPB7;RT0;XT0;#SPN60;#RCF+002500;BW0280; BW Sets bandwidth to as narrow as possible... SWT13 Copies the current vreq to VFO B FT1 Selects VFO A UPB7Moves the VFO A up 5 RT0/XT0 Clear RIT and

Re: [Elecraft] P3 Display of split

Hi Bill and others, The split macro does move the B vfo up by 1khz but this is not shown on the display (Red band) until i manually move the B vfo even just one digit. The prob is not data cable cons but thanks for the thought. I may try changing the order of some of the things in the macro or

Re: [Elecraft] P3 Display of split

If you're saying "with both VFOs on same freq, the P3 doesn't show the red band indicating that VFO B is the TX freq. " that's normal. Since both are on same freq the VFO B cursor is hidden behind the green VFO A cursor. But I may have misread your post. Sent from my iPhone ...nr4c. bill >

Re: [Elecraft] P3 SVGA questions

On 04/22/2016 12:08 PM, Mike Dodd wrote: 1. I found some 6" LCD monitors commonly used with Raspberry Pi devices. If a monitor is specified as VGA, will the P3 SVGA option drive it OK? The user manual seems to imply that it will, with the various display resolutions, but I'd like to be sure

[Elecraft] P3 SVGA questions

After being disappointed by the P3's inability to display decode CW and data text (as the PX3 does) without the SVGA option (that's definitely the BOO of the week!), I am now searching for a tiny monitor that won't wipe out half my remaining desk space. I have a couple of questions: 1. I

[Elecraft] P3 Display of split

Hi All, I have noticed a little problem (not much) with the P3 display. I have A K3 P3 and vga card set up as per the book and work fine until I go from normal to split working. I achieve this with a macro on the K3. The problem is the K3 goes into split but the display on the P3 and monitor

Re: [Elecraft] P3 problelms

What is the SPAN set to on the P3? It should be the same as FLDIGI - ~ 3 KHz - to make them look the same. Brian, K0DTJ > On Apr 21, 2016, at 12:49, Richard W Hemingway wrote: > > Sorry to be back again. However, I seem to have a problem between the P3 and > the

Re: [Elecraft] P3 CW/data text decode?

all KE7X Elecraft books, see www.ke7x.com > > > > From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Mike Dodd > <m...@mdodd.com> > Sent: Wednesday, April 20, 2016 9:01 PM > To: elecraft@mailman.qth.net > Sub

[Elecraft] P3 problelms

Sorry to be back again.  However, I seem to have a problem between the P3 and the fldigi.  I see a lot of stations on the P3 but  don't see any on the Fldigi, which is centered on 14,070.15 looking for PSK and the P3 which is also centered  at the same freq.  Every once in a while I see a

Re: [Elecraft] P3 CW/data text decode?

; > For all KE7X Elecraft books, see www.ke7x.com > > > > From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Mike Dodd > <m...@mdodd.com> > Sent: Wednesday, April 20, 2016 9:01 PM > To: elecraft@mailman.qt

Re: [Elecraft] P3 CW/data text decode?

com> Sent: Wednesday, April 20, 2016 9:01 PM To: elecraft@mailman.qth.net Subject: [Elecraft] P3 CW/data text decode? I just upgraded from a KX3/PX3 to a K3s/P3. On my PX3, I could hold a key (LABELS?) to get a two-line display of characters the KX3 decoded in CW and data modes. I can't find this feat

[Elecraft] P3 CW/data text decode?

I just upgraded from a KX3/PX3 to a K3s/P3. On my PX3, I could hold a key (LABELS?) to get a two-line display of characters the KX3 decoded in CW and data modes. I can't find this feature on my P3. Is it there? The only place the owner's manual mentions text decode is in the SVGA section. I

Re: [Elecraft] P3 vs SDRPlay on Raspberry Pi

Jerry, This is my SDR Linux view setup. I am running on Ubuntu 14 - 64 bit. I use QUISK (Version 3.6.11) - to interface my KX3 to a rather old Dell Inspiron i7. To do this you need the USB Control cable (KXUSB) and a decent sound card. The sound card on the laptop was mono

Re: [Elecraft] P3 vs SDRPlay on Raspberry Pi

Did this go out? On April 18, 2016 1:04:42 PM EDT, Jerry Moore wrote: >I'm looking at getting a Pan adapter of sorts in the near future. I >like >what I'm reading about SDRPlay but since I use a Raspberry Pi to >interface >my K3S I'm not sure on what software is

[Elecraft] P3 vs SDRPlay on Raspberry Pi

I'm looking at getting a Pan adapter of sorts in the near future. I like what I'm reading about SDRPlay but since I use a Raspberry Pi to interface my K3S I'm not sure on what software is available for that platform. Their website is a bit vague on it. Is anyone currently successfully using SDR

[Elecraft] P3 w TX MON option - flashing display?

Is there anybody else out there with a P3 (with TX MON option installed) that sometimes notices intermittent flashing of the P3 display? I only see the intermittent flashing when the directional coupler is cabled to the P3. Elecraft support has never heard of this so I'm just wondering if anybody

Re: [Elecraft] P3 Ref Lvl saving

Hi Paul Thanks for looking into what is really a minor issue. Here's what I see with my setup: K3 6299, P3 2380 with SVGA (which I think I ordered at the same time as the P3). P3 is powered from K3. The K3 is running: MCU 5.38, DSPs 2.86, FP 1.25, DVR 1.03 The P3 is 1.60 SVGA 1.34 and

Re: [Elecraft] P3 Ref Lvl saving

WOW! I wish my noise floor was only that noisy on 160!! I'm happy when it goes down to -110DBm. I average about -100DBm!! Gene, N9TF   Hi Bill, Make sure you have SpanScale turned off, and then try it.  I just tried it here on my bench units.  I put the K3 on 160 and set the RevLvl to 139

Re: [Elecraft] P3 Ref Lvl saving

Hi Bill, Make sure you have SpanScale turned off, and then try it. I just tried it here on my bench units. I put the K3 on 160 and set the RevLvl to 139 (it's noisy here). Then power cycled the radio and P3. The P3 came up with 139 on 160 meters. -Paul -- View this message in context:

[Elecraft] P3 Ref Lvl saving

I have noticed that my P3 does not correctly save the Ref Lvl for 160M over a power off/on cycle. The normal level for 160M here is about 96 while all the other bands are above 100. When I power off when set to another band, power on again, and switch to 160M, the Ref Lvl is set to the level

Re: [Elecraft] P3 meters MCU 01.60

By "blanked" it means that the numeric SWR value and the SWR meter "needle" are erased. The meter outline and scale are still there. Both the SWR and power meters are blanked in this way when the transceiver goes back to receive mode. Alan N1AL On 04/06/2016 03:14 AM, Thomas Lindner

[Elecraft] P3 meters MCU 01.60

>From the firmware note: * SWR meter blanked: Both the analog and digital SWR displays are now blanked whenever the transmit power is too low to give a valid reading. What I have to do to get the meters blanked during reception? 73 de Tom DL2RUM

Re: [Elecraft] P3 Panadaptor many different tools

I've used the P3 to make both stills and videos for use in radio classes. What AM looks like, CW SSB USB LSB ...PSK RTTY When width set to 5kc, it is a great analyzer. Some USB stations have considerable LSB content. oops. And lots of strange stuff from EQ settings & overdriving

Re: [Elecraft] P3 Panadapter size

It's on the web site. But the P3 is the same height and depth as the K3. Sent from my iPhone ...nr4c. bill > On Apr 2, 2016, at 2:16 PM, Mike Dodd wrote: > > While eagerly awaiting delivery of my K3s kit on Tuesday, I built a cardboard > mockup of it and the P3 panadapter to

Re: [Elecraft] P3 Panadaptor

On 4/2/2016 4:29 PM, j...@kk9a.com wrote: What is the secret to using a P3 during major contests? I'll echo what others have said about finding signals for S, and I'll also add that I use it for locating and tuning RTTY signals. It takes a bit of practice to get used to tuning the twin peaks

Re: [Elecraft] P3 Panadaptor

Hi John, Set your Span to 10 KHz., then go looking at the pileups for either of the DX operations that are out there now... Offset the center to the side, and look at the people calling the DX station... Watch the traces as the DX station answers callers, you will see the people he is answering

Re: [Elecraft] P3 Panadapter size

All that room in there or in the external speaker enclosure is perfect for holding a GPSDO for driving the external reference board. -Bob N3XKB On Sat, Apr 2, 2016 at 12:16 PM, Mike Dodd wrote: > While eagerly awaiting delivery of my K3s kit on Tuesday, I built a > cardboard

Re: [Elecraft] P3 Panadaptor

I'll echo what everyone has said about using the waterfall. Pretty much just maximize the area of the waterfall display to the extent the P3 will let you. Then S is a matter of hopping from trace to trace, and you don't miss the ones you would be missing by tuning past them without the display.

Re: [Elecraft] P3 Panadaptor

Sent before done. More below. On Saturday, April 2, 2016, Guy Olinger K2AV wrote: > The waterfall is what shows vacant frequencies. It gives you the most > recent history of frequencies. To start set the span so there's about four > or five operating slots per inch. > > I

Re: [Elecraft] P3 Panadaptor

The waterfall is what shows vacant frequencies. It gives you the most recent history of frequencies. To start set the span so there's about four or five operating slots per inch. I make the amplitude display as squished as possible and the waterfall as big as possible. I also have the SVGA

Re: [Elecraft] P3 Panadapter size

Funny thing is that when I first saw the P3 I was thinking CRT due to the depth of it :-) Of course, it's to better match the K3/K3s in depth. 73, Phil -- Sent from my iPhone 5S > On Apr 2, 2016, at 11:33, Joe Subich, W4TV wrote: > > > > What's inside the P3 that

Re: [Elecraft] P3 Panadaptor

Maximize and utilize the waterfall portion of the display. Ed W0YK _ John KK9A wrote: I added the P3 panadaptor to my K3S line this year I have used it twice - in the CW WPX RTTY contest and in last weekend's WPX Phone contest. I

Re: [Elecraft] P3 Panadaptor

I think you may need to reduce the span on your P3 so you see a smaller part of the band with more detail. The right level of detail depends on whether you are using CW, RTTY, or SSB. A span of 20 or lower is good for CW. With RTTY, you want to see both tracks of the signal as an aid to

Re: [Elecraft] P3 Panadaptor

Well, it makes unassisted S/P a lot faster; just tune for the next blip. And, if you have directional antennas, like a NE beverage on 160 or 80, it helps to pre-qualify some signals as to multiplier possibility. And it certainly helps to see how close the interference is when you're running. I

[Elecraft] P3 Panadaptor

I added the P3 panadaptor to my K3S line this year I have used it twice - in the CW WPX RTTY contest and in last weekend's WPX Phone contest. I have not found any use for it (in contesting) other than to tell me that the band segment is fill of signals, which I already knew. I did not notice any

Re: [Elecraft] P3 Panadapter size

How about room for the SVGA board and the wattmeter and other accessories that mighty use the empty connector spots on the rear panel? Elliott WA6TLA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] P3 Panadapter size

Hi Mike! I have both the P3 and the PX3, and your question is a natural one to ask. There's very little space inside the P3's box that's used. I'll wager the cabinet size was determined by the K3's cabinet. Personally, I wouldn't want it to be any smaller, and the depth matches the rest of the

Re: [Elecraft] P3 Panadapter size

> What's inside the P3 that justifies a cabinet 7X larger than the PX3? Nothing. It is made the same depth as the K3 so the front panels will remain parallel/coplanar when both units are used with bails extended. 73, ... Joe, W4TV On 4/2/2016 2:16 PM, Mike Dodd wrote: While eagerly

[Elecraft] P3 Panadapter size

While eagerly awaiting delivery of my K3s kit on Tuesday, I built a cardboard mockup of it and the P3 panadapter to see how they will fit on my desk. I was surprised to discover that the screen is the same size as the one in the PX3 I've been using with

Re: [Elecraft] P3 v1.59 & SVGA v1.33 BETA now available for download

KE7X For all KE7X Elecraft books, see www.ke7x.com. From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Alan <n...@sonic.net> Sent: Monday, March 14, 2016 6:49 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 v1.59 & SVG

[Elecraft] P3/SVGA 1.60/1.34 General Release, Now Available

P3/SVGA 1.60/1.34 Firmware is now available as a general release. Please be sure to download, install and use the latest version of P3 Utility which can be found here: http://www.elecraft.com/software/P3/P3_Utility_Setup_1_16_3_15.exe Currently our tech writer is in the process of updating the

Re: [Elecraft] P3 Beta Firmware Issue with DX Labs

You are a software God Paul!  :) -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Mon, 2016-03-21 at 16:41 -0700,

Re: [Elecraft] P3 Beta Firmware Issue with DX Labs

Guys, I found the bug, it will be fixed in the next general release (coming soon). Thank you very much for the concise steps to reproduce, it made it a lot easier to find. Kind regards, Paul -- View this message in context:

Re: [Elecraft] P3 Beta Firmware Issue with DX Labs

Hi Gary, Please email me directly regarding BETA firmware. My email address is pauls at you know where dot com. I'll take a look at the firmware and may have you try something out. Thanks and kind regards, Paul -- View this message in context:

Re: [Elecraft] P3 Beta Firmware Issue with DX Labs

I just updated my P3 to the beta firmware. The symptom Gary described also occurs here after I switch between SVGA data mode on/off. I find that I now have to power cycle the P3 to get CW decode to begin flowing data to Commander->WinWarbler again. I did not have to perform a P3 power cycle

Re: [Elecraft] P3 CENTER button and SVGA display

There is a bug fix in the latest beta version of P3 firmware that might apply: P3SVGA 01.33 / 3-7-2016 * Center Frequency in Tracking mode: Fixed an old bug that caused the VFO A cursor to reset to center of screen when VFO A was tuned after the user had adjusted the center frequency offset

Re: [Elecraft] P3 CENTER button and SVGA display

Looks like it's time for me to call Elecraft support on this one . - 73 and good DX de Mike, K6MKF, President - NCDXC From: Mike Flowers [mailto:mike.flow...@gmail.com] Sent: Friday, March 18, 2016 10:22 PM To:

[Elecraft] P3 CENTER button and SVGA display

Hi Gang, I have the P3 with SVGA option and a K3. The firmware appears up to date, according to the P3 Utility. I've set CenterEn: ON and use the CENTER button and the P3 knob to move DX pileups more into the center of the display. When I hold the CENTER button while in CENTER

[Elecraft] P3 Beta Firmware Issue with DX Labs

Hi, I have updated to the latest P3 Beta firmware MCU 1.59 and have the SVGA option installed. It's working great, except with the previous firmware, with SVGA Data off, DX Labs Winwarbler would display both decoded CW and RTTY from the K3 and with SVGA Data on it would disable Winwarbler. Now

Re: [Elecraft] P3 v1.59 & SVGA v1.33 BETA now available for download

On 03/14/2016 01:47 PM, Paul Saffren N6HZ wrote: For those of you trying out the #RCF command, first set your fixed mode to "SLIDE" as opposed to half-span, full-span, otherwise the P3 will recenter the cursor as it moves to either edge. Or "Static". Alan N1AL -Paul -- View this message

Re: [Elecraft] P3 v1.59 & SVGA v1.33 BETA now available for download

For those of you trying out the #RCF command, first set your fixed mode to "SLIDE" as opposed to half-span, full-span, otherwise the P3 will recenter the cursor as it moves to either edge. -Paul -- View this message in context:

Re: [Elecraft] P3 v1.59 & SVGA v1.33 BETA now available for download

One important note: PLEASE email me directly with any bugs and/or questions. Do not email customer support for beta releases. My email address is pauls at you know where dot com. Thanks and 73, Paul -- View this message in context:

Re: [Elecraft] P3 v1.59 & SVGA v1.33 BETA now available for download

Paul, Thank you and everyone involved for the additional features!  I did not know about the counter increment...  Time to build more macros... The Center offset has been so useful!  I hit a button, and the DX moves to the left edge, and I see the pileup on the right...   I have had a bit of a

[Elecraft] P3 v1.59 & SVGA v1.33 BETA now available for download

I'm releasing a follow up BETA since the last release. Recently we were able to solve some additional bugs and develop a couple of new features with the P3 & SVGA that are significant enough to warrant a separate release. Our website has also been updated with instructions on how to download and

Re: [Elecraft] P3 and Apple Display monitor

Phil: > On Mar 10, 2016, at 6:15 PM, PHILIP GRAITCER wrote: > > I've just installed an svga card in my P3 and I'm trying to get it to work > with a 7 or 8 year old apple display monitor. It has a DVI male connector so > I purchased a DVI to VGA adapter. But the setup doesn't

[Elecraft] P3 and Apple Display monitor

I've just installed an svga card in my P3 and I'm trying to get it to work with a 7 or 8 year old apple display monitor. It has a DVI male connector so I purchased a DVI to VGA adapter. But the setup doesn't seem to work. Any idea why? Any experience with this monitor and the P3 or is there a

Re: [Elecraft] P3 Vs. K3 Noise Level

Alan, Thank you for such a clear explanation!  I understood the process, and why, but having someone actually put numbers to it helps in getting that "gut feeling" as to why...  Thank you!! -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net For MixW support

Re: [Elecraft] P3 Vs. K3 Noise Level

The indicated noise level depends on the receive bandwidth. For example, if you use a narrower bandwidth on the K3, you'll notice that the S meter reads lower. The effective bandwidth of the P3 is approximately one pixel on the display, which is SPAN/468. So, for example, if the span is 47

[Elecraft] P3 Vs. K3 Noise Level

All: Even after considering the P3 manual (page 21) and with AGC off, I find the following difference in S unit measurement odd. Band P3K3 75m S5S9 10m S0S2 I'm trying to ascertain an accurate noise level reading at my QTH. Does anyone have any thoughts on the

[Elecraft] P3 - Control from Python Gui

Fellow Hams, I have found time to update the P3 Controls - it is now fully GUI - and you can have any type of split (not negative !!) with a p3 bandwidth of up to 10Khz, with the carrier at any offset you want from (0-5khz) The code is in my github page at

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

As much as I dislike being a "me too" person, Elecraft is to me, the epitome of proper product, service and respect. If we could only make politicians in the same vein. 73, Gary KA1J > Thank you Alan!  As always Elecraft is there with the right stuff at > the right time!  THANKS AGAIN

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Thank you Alan!  As always Elecraft is there with the right stuff at the right time!  THANKS AGAIN GENTS!!! -- 73's, and thanks, Dave For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see:

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Hi Paul, Firstly-- thank you for putting this on your radar!   I will rephrase-- the P3 fails to control the K3 when using some macros in sequence, due to the P3 failing to implement flow control, and the P3 overrunning the K3. End result is the same however-- the P3/K3 cluster fails to execute

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Yes, the issue is that after the P3 sends the UP7, DN7 command, etc. to the K3 it doesn't receive the new frequency back from the K3 right away. So when the #FXT1 command (go to fixed-tune mode) is executed it is based on the old K3 frequency, not the new one. Adding a delay in the

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Hi Dave, The P3 does execute the commands one after another. The problem is likely that the K3 commands take a little longer to execute and there is no waiting in the P3 for the K3 to change frequency. In other words, the P3 executes the serial commands in sequence. It gets to a K3 command

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

he single key you > used for the above macro, and poof! > > Warren, KD4Z > > > On 2/26/2016 12:48 AM, Jim Miller <j...@jtmiller.com> wrote: > > Date: Thu, 25 Feb 2016 22:43:18 -0500 > > From: Jim Miller <j...@jtmiller.com> >

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

ft Up) > > (A snapshot of this setup in the Genovation software is here: > https://dl.dropboxusercontent.com/u/24789865/Genovation_Pileup_ssb_ke > y.jpg > > Connect the Genovation keypad to the P3 and press the single key you > used for the above macro, and poof! > > Warren,

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

ion keypad to the P3 and press the single key you used for the above macro, and poof! Warren, KD4Z On 2/26/2016 12:48 AM, Jim Miller <j...@jtmiller.com> wrote: > Date: Thu, 25 Feb 2016 22:43:18 -0500 > From: Jim Miller <j...@jtmiller.com> > Cc: Elecraft Reflector <elecraft@mail

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

This change allows for the control of the P3 via the Genovation keypad. -- 73's, and thanks, Dave For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

HI, I do not believe this corrects the macros being strung together bug which currently exists in the P3.  I hope this bug fix happens sooner than later. -- 73's, and thanks, Dave For software/hardware reviews see: http://www.nk7z.net For MixW support see:

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Will any of these changes effect the use of macros programmed into the P3 that are used to control the K3 - ala the "48 button keypad"? Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Hi Vic, As far as I know no work was done on that particular bug for this release. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-v1-57-SVGA-v1-31-BETA-firmware-available-tp7614603p7614613.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

Jim, I'm not familiar with that macro design. I do know that this version allows intermixing of P3 and K3(s) commands within the same keyboard macro. 73, Paul -- View this message in context:

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

The bug that the p3 and svga freeze for a second or three apparently randomly still exists in the production firmware. It's particularly noticeable when operating QSK CW in a pileup. Does this version address that? Vic 4X6GP/K2VCO > On 26 Feb 2016, at 12:42 AM, Paul Saffren N6HZ

Re: [Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

So with this firmware will it be possible to do the DX on the LHS of the P3 screen and the pileup to the right and assign it to a P3 Fn key? jim ab3cv On Thu, Feb 25, 2016 at 5:42 PM, Paul Saffren N6HZ wrote: > BETA firmware packages for the P3 & SVGA are now available for

[Elecraft] P3 v1.57 / SVGA v1.31 BETA firmware available

BETA firmware packages for the P3 & SVGA are now available for download from the Elecraft website. These BETA versions contain new features as well as several bug fixes. With these versions we introduce the ability to embed P3 commands within SVGA keyboard macros. Also new is the ability to

[Elecraft] [P3] ETA on beta for executing #macros contained in P3

Is there any projected ETA on a P3 firmware release to get #macros (ones directed to the P3 itself) to execute from P3 keyboard macros? I forgot these don't work yet and am stuck until they do! Beta please :) Warren, KD4Z __ Elecraft

Re: [Elecraft] P3 Single Side of a Pilup

From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Jorge Diez - CX6VM <cx6vm.jo...@gmail.com> Sent: Friday, February 19, 2016 4:54 AM To: a45wg Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] P3 Single Side of a Pilup sounds very good and this is the idea

Re: [Elecraft] P3 Single Side of a Pilup

ted me…. Details and Info at > http://sy-edm.com/posts/elecraft-p3-1-side-of-pile-up.html < > http://sy-edm.com/posts/elecraft-p3-1-side-of-pile-up.html> > > Source code at > https://github.com/timseed/Elecraft-K3-Pan-Pile-Up-Settings.gi

[Elecraft] P3 Single Side of a Pilup

…. Details and Info at http://sy-edm.com/posts/elecraft-p3-1-side-of-pile-up.html <http://sy-edm.com/posts/elecraft-p3-1-side-of-pile-up.html> Source code at https://github.com/timseed/Elecraft-K3-Pan-Pile-Up-Settings.git <https://github.com/timseed/Elecraft-K3-Pan-Pile-Up-Set

<    4   5   6   7   8   9   10   11   12   13   >