simultaneously in the same K3.
73,
Ed - W0YK
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> [EMAIL PROTECTED]
> Sent: Saturday, 10 November, 2007 17:35
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] [K3]
I'm confused, the KBPF3 is a fairly large board that mounts on the RF board
and operates in bypass to the ham band only BPF. Has anyone seen the KRX3
schematic or an image that tells the full story?
Al WA6VNN
In a message dated 11/10/2007 3:23:21 P.M. Pacific Standard Time,
[EMAIL PROTECT
If you have two KBPF3s. ;>)
Ed
Wayne Burdick wrote:
>
> Or both, if you want general-coverage receive on both.
>
> Ed Muns wrote:
>
> >> In the long run I plan on using the KFL3B-FM in the primary RX and
> >> the KFL3A-6K in the secondary RX for listening to
> broadcast stations.
> >> Afai
Or both, if you want general-coverage receive on both.
Ed Muns wrote:
In the long run I plan on using the KFL3B-FM in the primary
RX and the KFL3A-6K in the secondary RX for listening to
broadcast stations. Afaik this would require the KBPF3 to be
installed on the KRX3 board and not on the main
> In the long run I plan on using the KFL3B-FM in the primary
> RX and the KFL3A-6K in the secondary RX for listening to
> broadcast stations. Afaik this would require the KBPF3 to be
> installed on the KRX3 board and not on the main RF board. As
> a clone of the main receiver this should be po
5 matches
Mail list logo
