Re: RE: [Elecraft] K2 Alignment & Test, Part II PLL problem, Continued

that the list of original parts left to be replaced is dwindling. :) Thanks again for all the help, John > > From: "k4zm" <[EMAIL PROTECTED]> > Date: 2006/04/19 Wed AM 07:26:45 CDT > To: <[EMAIL PROTECTED]> > Subject: Re: RE: [Elecraft] K2 Alignment &

Re: RE: [Elecraft] K2 Alignment & Test, Part II PLL problem, Continued

6/04/11 Tue PM 08:18:46 CDT > To: <[EMAIL PROTECTED]>, > > Subject: RE: [Elecraft] K2 Alignment & Test, Part II PLL problem, Continued > > John, > > For the time being (until you solve the current problem) the only voltages > at U6 that matter are pins 1, 2

RE: [Elecraft] K2 Alignment & Test, Part II PLL problem, Continued

John, For the time being (until you solve the current problem) the only voltages at U6 that matter are pins 1, 2 and 3 - and those are correct. The other pins will likely fall into line after you have this problem fixed and if not there is another problem with the VCO. Right now, the voltages be

RE: [Elecraft] K2 Alignment & Test, Part II PLL problem, Continued

Be certain you have correctly installed L31 and that it is the 10 uH shielded inductor. Resistor R115 is about the same size - is there a possibility that you exchanged these parts? Be certain you have D16, D17 and D18 inserted the proper way around (the Parts Placement Diagram is handy for check