I went down to my local Shadio Rack and bought one of those ESD mats. But
I can't convince myself that it works. If I touch my meter probes to the
mat I measure infinity ohms, no matter how close together the two probes
are. I know the meter works - If I hold one probe tip in each hand the
meter
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Kit vs Ready Built
> Check out this site. A lot of experienced builders put their comments
> here
And from the appearance of the user build experiences, many folks are using
ESD mats for K3 assembly - and to minimize "shop
I purchased factory built because if my kit had any problems,
shipping it back to the factory would involve
hundreds of usd $$$ and weeks of delay.
Shipping distance from me to factory:
about 12,700 KM. or 7,900 miles or
6,900 nautical miles.
ONE WAY.
The earth is large.Charles Harpole, HS0ZCW
WW2PT wrote:
Go for the kit! Unless you have eyesight problems or two left thumbs
you should have zero problems following the assembly manual.
Having two left feet and being unable to dance as well as two left
thumbs and inept at kits I'm glad to see the option of ready built. :-)
--
73 K5LDB
Go for the kit! Unless you have eyesight problems or two left thumbs
you should have zero problems following the assembly manual.
I did the math, I saved $370.00 by screwing the thing together myself.
That's enough to pay for three 8-pole filters, or 92.5% of the cost of
the 100W PA.
Asse
There have been quite a few products mentioned in previous threads, and are in
the archives. Examples include Radio Shack and TigerDirect.com.
-- Original message --
From: "Paul Christensen" <[EMAIL PROTECTED]>
> And from the appearance of the user build experie
Check out this site. A lot of experienced builders put their comments
here
And from the appearance of the user build experiences, many folks are using
ESD mats for K3 assembly - and to minimize "shop rash."
Any recommendations for purchase?
Paul, W9AC
Check out this site. A lot of experienced builders put their comments here
http://www.zerobeat.net/mediawiki/index.php/Main_Page
73, Mike, N4GW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Barry Simpson
Sent: Friday, February 22, 2008 7:59 PM
To: ele
8 matches
Mail list logo