On Sat, Mar 22, 2008 at 6:10 AM, Brendan Minish <[EMAIL PROTECTED]> wrote:
>
> On Fri, 2008-03-21 at 18:33 -0700, hank k8dd wrote:
>
> > The problem with Elecraft rigs switching Ameritron amps
> > has existed with the K2/100 and, so it appears, now with
> > the K3/100.
>
> I think the problem
>>
I think the problem is not elecraft rigs but amplifiers that have
unreasonably slow switching times.
10msec or longer is unreasonably slow and I think it's 'unreasonable' to
blame the manufacturer of the radio because the amp manufacturer saved a
few bucks and used a cheap, slow re
Hallo Roger,
delay times. So far there's been no response from Elecraft concerning this
subject after a few days of discussion on this list. We don't even know if
they could easily make the modification in the firmware.
Elecraft has said in the past, several times, that they will be adding
x27;t even know if
they could easily make the modification in the firmware. If they decide to
respond to this issue and say they won't or can't do it then I'll be glad to
look for a hardware modification to my amp.
73,
Roger W1EM
-Original Message-
From: Brendan Minish
On Fri, 2008-03-21 at 18:33 -0700, hank k8dd wrote:
> The problem with Elecraft rigs switching Ameritron amps
> has existed with the K2/100 and, so it appears, now with
> the K3/100.
I think the problem is not elecraft rigs but amplifiers that have
unreasonably slow switching times.
10msec or
Bob speaks the truth here. The K6XX fast relay circuit
is the answer.
The problem with Elecraft rigs switching Ameritron amps
has existed with the K2/100 and, so it appears, now with
the K3/100.
I have had the K6XX fast relay circuit in my AL-1200
working with the K2/100's. No KPA-100 shutdow
I rely on my MicroHam Microkeyer to key the rig and amp. You can set the
delay in the MicroKeyer.
You can also insert a half character space at the beginning of your CW
macros so there is a slight delay between going into transmit mode and
actually
transmitting. In the N1MM contest softw
Or rebuild the amp with faster relays like the Jennings RJ1A.
Jim SM2EKM
--
AE4CW wrote:
I have the same issue with a slow switching linear and am thinking about
putting a slow relay in the keying circuit which I need anyway to invert the
keying signal.
-
Chuck, AE4
ginal Message -
From: "Roger Marrotte" <[EMAIL PROTECTED]>
To: "'Dave G4AON'" <[EMAIL PROTECTED]>;
Sent: Thursday, March 20, 2008 7:12 AM
Subject: RE: [Elecraft] K3 and linear amp
> I guess as of now I'm out of luck if I want to use my amp wi
Roger Marrotte wrote:
I guess as of now I'm out of luck if I want to use my amp with a K3. I
just checked the manual for my AL-811H and "The open frame relay in the
AL-811H takes approximately 15ms to switch states". My K3 is on order.
I hope there's a K3 firmware change made before I get my
Hold the phone.
I am using my K3 with an AL80A...basic amp with the same relay as many of the
other Amertrons use. I have seen no issues at all. Also, you might look at
this little gimmick that might help you out here This is the URL
http://www.k6xx.com/radio/fastrely.html
Also, I
You can still use the amp by manually activating the transmit switch on both
pieces of gear. I do this with one old rig I have. Not the nicest solution but
it will work By the way I have the QSK add on switch and it works real nice
for QSK CW
73 Doug K3DUG
K3 #
-- Original
I have the same issue with a slow switching linear and am thinking about
putting a slow relay in the keying circuit which I need anyway to invert the
keying signal.
-
Chuck, AE4CW
--
View this message in context:
http://www.nabble.com/K3-and-linear-amp-tp16180386p16181739.html
Sent from
I guess as of now I'm out of luck if I want to use my amp with a K3. I just
checked the manual for my AL-811H and "The open frame relay in the AL-811H
takes approximately 15ms to switch states". My K3 is on order. I hope
there's a K3 firmware change made before I get my K3, that will allow me to
Todd -
KEY OUT on the back of the K3 is for connecting to an external amp.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009 and 0319
On Thu Mar 20 5:27 , Todd Ruby sent:
>My K3 #339 went QRV yesterday afternoon after successfully
>downloading firmware via the upgr
-Original Message-
From: Todd Ruby
I received 59+20 and excellent audio from central europe. ... How do I
get the K3 to trigger the relay in my Ameritron AL 1200?.
-
If you're 20 over in Europe, you don't need an amp!! :-)
- Keith N1AS -
- K2 5411.ssb.100 -
- K
Hi Tod,
One question remains and it is probably ridiculously simple but I can
not see it. How do I get the K3 to trigger the relay in my Ameritron AL
1200?. I see no connection for a cable to the amp nor nothing in the
config menu.
I don't know the Ameritron AL but KEY OUT should be what you a
17 matches
Mail list logo