gt;
Cc:
Sent: Wednesday, December 13, 2006 9:11 PM
Subject: RE: [Elecraft] KDSP2 questions
> Chuck,
>
> If you get the "not inst" message it means that the KDSP2 is not being
> recognized.
> The fact that it is intermittent indicates that there is a bad solder
> c
I assume you mean the rtc (real-time clock). It is on (or at least starts
out that way, with power on). However, after some time of
operation, I get
"not inst." The DSP filters work fine-- I just can't call them up in the
menu to edit them or make changes without doing the power on/off.
Is th
Chuck,
If you get the "not inst" message it means that the KDSP2 is not being
recognized.
The fact that it is intermittent indicates that there is a bad solder
connection somewhere.
You might try re-flowing the solder on the KDSP2 board.
73,
Don W3FPR
> -Original Message-
>
> I assume yo
on/off.
So far have not heard from Elecraft support on this.
73,
Chuck NI0C
- Original Message -
From: "Jean-François Ménard" <[EMAIL PROTECTED]>
To: "Chuck Guenther" <[EMAIL PROTECTED]>;
Sent: Wednesday, December 13, 2006 8:16 AM
Subject: Re : [Elec
Just switch ON clock in SECondary K2 menu
- Message initial
De : Chuck Guenther <[EMAIL PROTECTED]>
À : elecraft@mailman.qth.net
Envoyé le : mercredi 13 décembre 2006, 08 h 22 min 38 s
Objet : [Elecraft] KDSP2 questions
2.) Referring to the KDSP2 Manual, page 38, troubleshooting: The
5 matches
Mail list logo