Jack...
Works just like you outlined. Also, I notice that the power out
indicator on the KPA500 reads the power out of the k3 when in standby
mode. I wonder how accurate that is compared to a dedicated inline power
meter. At any rate, looking forward to this new flexibility.
...robert KE2W
Is 17mSec not fast enough? When you hit the OP button on the KPA, it tells the
K3 to make the adjustment, and the power is very quickly changed. Same is true
when you go from OP to STBY, the K3 goes back to 100 watts.
I seriously question whether you can do things as fast with a macro and having
Mike and Jack...
Thanks for your suggestions.
Mike, I'm not clear "where" you are implementing your macro; perhaps you
are using the K3 utility. I'd like to avoid that and interact with the
radio directly. Jack, what I'm looking for is not different drive levels
on different bands, but switchi
We thought about that when we designed the KPA500. Take a look at page 29 of
the K3S Rev A manual - "Per-band Power Control”.
You need to have the KPA500 communicating with the K3 through the Aux I/O cable.
It works amazingly well, no macros needed!
73,
Jack, W6FB
> On Dec 5, 2023, at 12:35 PM
4 matches
Mail list logo
