Thanks George,
Turns out it was a matter of settings on both the K3S and the WSJT software.
John
WA1EAZ
> On Feb 9, 2017, at 1:30 PM, George Thornton
> wrote:
>
> I am not sure I understand your problem, and therefore my potential solution
> may be irrelevant.
>
> I experienced sudden extr
Don,
No, nothing in the LINE IN jack.
The audio setting on WSJT did also get changed. I put it back on CODEC.
It is working now. I had to set CONFIG > MIC SEL = LINE IN, and increase the
power slider on the WSJT screen.
Thanks,
John
WA1EAZ
> On Feb 9, 2017, at 12:53 PM, Don Wilhelm wrote:
I am not sure I understand your problem, and therefore my potential solution
may be irrelevant.
I experienced sudden extremely low power output recently during a contest.
The solution was to re-install the firmware and recalibrate TX power.
I later determined the cause was voltage drop coming f
John,
Is there any chance you plugged something into the K3S LINE IN jack?
Doing so turns off the CODEC audio out and the audio is taken from the
LINE IN jack only.
If nothing in the LINE IN jack, check the levels for the CODEC in your
computer.
73,
Don W3FPR
On 2/9/2017 10:10 AM, stengre
Check the "Master" level for "Speakers (USB Audio CODEC)" in Windows'
Volume Control. If things got changed, perhaps your Windows Sound
Settings also got changed.
73,
... Joe, W4TV
On 2/9/2017 10:35 AM, John Stengrevics wrote:
Joe,
Thanks. The MIC SEL did get changed somehow. So, I no
5 matches
Mail list logo
