On 05/10/2014 06:27 PM, Bari wrote:
>
> Digital zoom is just interpolation and doesn't really help with edge
> finding with cheap cameras.
This camera has native 640 x 480 resolution. Up really
close, like
4 mm from the object, the pixels come out to about .0002" or
about .005mm! That is FINE re
OK, I found an ancient irc log where somebody had the same
problem,
and psha diagnosed it as being an extra copy of camunits
installed
in /usr/local/lib and advises to delete that. I did the
same, and
now I'm back to the previous error,
** (camview-emc-float.py:31224): WARNING **: unit_control
On 05/10/2014 05:57 PM, Jon Elson wrote:
>
> Yes, and it works here, too. But, the video cannot be
> zoomed, or at
> least I don't know how to do that. There is a Wiki page on
> LinuxCNC
> that specifically is about how to add zooming to the image.
> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Addin
On Saturday 10 May 2014 16:35:52 Jon Elson did opine
And Gene did reply:
> I'm moving this thread to the developer's list.
> I have been trying to get camview-emc set up on a
> new LinuxCNC install, and am totally lost! Can anyone
> give me step by step instructions to install it?
>
> I updated t
On 05/10/2014 05:57 PM, Jon Elson wrote:
> On 05/10/2014 05:21 PM, Bari wrote:
>> Did you install 12.04 or 10.04?
> No, this is a 10.04 install, with updates.
>>
>>
>> after installing the camunits packages add following lines to INI file:
>>
>> EMBED_TAB_NAME = Camera
>> EMBED_TAB_COMMAND
On 05/10/2014 05:21 PM, Bari wrote:
>
> Did you install 12.04 or 10.04?
No, this is a 10.04 install, with updates.
>
>
>
> after installing the camunits packages add following lines to INI file:
>
>EMBED_TAB_NAME = Camera
>EMBED_TAB_COMMAND = camview-emc -w {XID}
>
> This works here. I'll
On 05/10/2014 03:35 PM, Jon Elson wrote:
> I'm moving this thread to the developer's list.
> I have been trying to get camview-emc set up on a
> new LinuxCNC install, and am totally lost! Can anyone
> give me step by step instructions to install it?
>
> I updated to 2.5.4, which solved a few probl
I'm moving this thread to the developer's list.
I have been trying to get camview-emc set up on a
new LinuxCNC install, and am totally lost! Can anyone
give me step by step instructions to install it?
I updated to 2.5.4, which solved a few problems.
So, I am at the wiki page
http://wiki.linuxcnc.
