Gene,
I know the rpi 3b+ is a 64 bit processor, but I understand that it also runs
the 32bit software. So, my question is this, are you running 32bit OS or 64bit?
I am looking at various preempt rt kernels for the rpi. Some kernels are up as
far as 4.14.74 preempt rt for the 32bit mode. The lat
I am not a big fan of IBM but I have to say that because they defined the PC
bios and interrupt structure,
we all owe them a debt of gratitude for the continued degree of compatibility
on the X86 machines.
I thought that there was already a stable rt-preempt kernel for 4.9 LTS and
4.14 LTS and
If you're used to building kernels all the time, Xenomai on the Rockchip should
be a non-issue. The Xenomai mailing list is really helpful too. It'd be best to
start with PREEMPT-RT though and make sure that works first. If high latency is
the only issue during testing (no kernel panics, errors,
On Fri, 8 Mar 2019, Alan Condit wrote:
Date: Fri, 8 Mar 2019 08:34:39 -0800
From: Alan Condit
Reply-To: EMC developers
To: emc-developers
Subject: [Emc-developers] Arm with PCIe -- mesa 6i25
I am looking at processors for my next controller. I saw yesterday that the
RockPro64 has a PCIe 4x
I am looking at processors for my next controller. I saw yesterday that the
RockPro64 has a PCIe 4x connector. It has a six core RK3399 - dual core A72 -
quad core Arm53. At the moment that doesn’t mean much to me.
Anyway my question is would it be feasible to use the RockPro64 with a 6i25
boa
Yes, i saw it but these pins ( global pins) doesnt work in Linuxcnc 2.8
Vào Th 6, 8 thg 3, 2019 vào lúc 22:17 andy pugh đã
viết:
> On Fri, 8 Mar 2019 at 15:08, Thắng Lê wrote:
> >
> > As i know, linuxcnc cant change accleration during run gcode. So i just
> > wanna change it when linuxcnc is
On Fri, 8 Mar 2019 at 15:08, Thắng Lê wrote:
>
> As i know, linuxcnc cant change accleration during run gcode. So i just
> wanna change it when linuxcnc is in idle.
> I tried add "maxacc" command to set acceleration of tooltip in python
> interface.
Can't you use the INI HAL pins?
http://linuxcn
As i know, linuxcnc cant change accleration during run gcode. So i just
wanna change it when linuxcnc is in idle.
I tried add "maxacc" command to set acceleration of tooltip in python
interface.
To do it i modified 2 files:
src/emc/usr_intf/axis/extensions/emcmodule.cc (added maxacc function)