On Wed, 21 Oct 2020 at 19:33, wrote:
>
>
> Yes it’s commercial projects.
>
> So support us for the developing.
There are some active User Interface developers on the Forum, it might
be worth looking there ("Other user interfaces")
The other option is to hire a generic UI programmer and have
Anno domini 2020 Wed, 21 Oct 19:38:45 +0100
andy pugh scripsit:
> On Wed, 21 Oct 2020 at 19:36, Julian Wingert wrote:
> >
> > Ok, i start the bedding with 100.000 Dollars :)
>
> You might want to be careful with your decimal and thousands separators.
>
100.000,- :) Well, not unreasonable.
--
And I thought my English was bad because of bedding... Two fails in one
sentence 藍
On 21 October 2020 20:38:45 CEST, andy pugh wrote:
>On Wed, 21 Oct 2020 at 19:36, Julian Wingert
>wrote:
>>
>> Ok, i start the bedding with 100.000 Dollars :)
>
>You might want to be careful with your decimal
On Wed, 21 Oct 2020 at 19:36, Julian Wingert wrote:
>
> Ok, i start the bedding with 100.000 Dollars :)
You might want to be careful with your decimal and thousands separators.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical
Ok, i start the bedding with 100.000 Dollars :)
On 21 October 2020 19:57:01 CEST, jdsmoti...@gmail.com wrote:
>
>Yes it’s commercial projects.
>
>So support us for the developing.
>
>
>
>Sent from myMail for iOS
>
>
>Tuesday, 20 October 2020, 4:15 PM +0530 from andy pugh
>:
>>On Tue, 20 Oct
Yes it’s commercial projects.
So support us for the developing.
Sent from myMail for iOS
Tuesday, 20 October 2020, 4:15 PM +0530 from andy pugh :
>On Tue, 20 Oct 2020 at 11:08, Selim Tongay < se...@grafinery.com > wrote:
>>
>> new GUI, new apperance, new hardware, no user interaction with
On Tue, 20 Oct 2020 at 11:08, Selim Tongay wrote:
>
> new GUI, new apperance, new hardware, no user interaction with OS... It
> seems a commercial project.
> So, what about the Licences?
Like Tormach?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the
Anno domini 2020 Tue, 20 Oct 12:26:11 +0300
Selim Tongay scripsit:
> new GUI, new apperance, new hardware, no user interaction with OS... It
> seems a commercial project.
>
> So, what about the Licences?
In India? :)
>
>
> 16.10.2020 09:10 tarihinde Dr. Nikolaus Klepp yazdı:
> > Which
new GUI, new apperance, new hardware, no user interaction with OS... It
seems a commercial project.
So, what about the Licences?
16.10.2020 09:10 tarihinde Dr. Nikolaus Klepp yazdı:
Which company do you represent?
Nik
Anno domini 2020 Fri, 16 Oct 07:47:25 +0300
jdsmoti...@gmail.com
On 10/16/2020 07:11 AM, Matt Shaver wrote:
>From the e-mail address, I would guess:
http://www.jdsmotion.com/
Wow, Matt, I haven't seen you on in ages! Good to see you
around!
Jon
___
Emc-developers mailing list
On Fri, 16 Oct 2020 08:10:31 +0200
"Dr. Nikolaus Klepp" wrote:
> Which company do you represent?
"> > >On 10/14/2020 9:02 AM, jdsmoti...@gmail.com wrote:"
>From the e-mail address, I would guess:
http://www.jdsmotion.com/
___
Emc-developers
On Fri, 16 Oct 2020 at 05:48, wrote:
> 2. We know Linux cnc work with Mesa pci card but we don’t want to used this.
> We want to develop our own hardware and 90% our hardware is ready.
LinuxCNC also works with many other interface cards, from Pico,
General Mechatronics, Motenc and others:
Which company do you represent?
Nik
Anno domini 2020 Fri, 16 Oct 07:47:25 +0300
jdsmoti...@gmail.com scripsit:
>
> Dear Sir
>
> Maybe the communication way is different from my side. Sorry for that. I
> will explain our requirement again.
>
> 1. We want to make 3 axis CNC controller which
We will pay the cost for development.
Sent from myMail for iOS
Friday, 16 October 2020, 10:39 AM +0530 from bari00...@gmail.com
:
>Do you wish to remove any reference to LinuxCNC and make this all look
>like your own brand of CNC hardware and software?
>
>Are you looking for someone to
Do you wish to remove any reference to LinuxCNC and make this all look
like your own brand of CNC hardware and software?
Are you looking for someone to pay to make this all happen or do you
wish to do it all yourself after asking how to do it all here for free?
On 10/15/20 11:47 PM,
Dear Sir
Maybe the communication way is different from my side. Sorry for that. I will
explain our requirement again.
1. We want to make 3 axis CNC controller which used for cnc router , cnc
milling machine.
2. We know Linux cnc work with Mesa pci card but we don’t want to used this. We
It is not clear what your asking. It seems that starting a new thread
would be more appropriate than hijacking a non-related thread. I will
attempt to change the subject.
You mention GUI and controller and your hardware runs on Linux.
Are you looking for:
A LinuxCNC GUI for your hardware?
A
17 matches
Mail list logo
