Peter C. Wallace wrote:
> The problem is subtle and comes and goes. I have only seen the problem with
> compilcated designs (our resolver interface with embedded 32 bit DSP shows the
> problem) The actual bug makes small counters (say 3 - 10 bits) fail to count!
>
> Using ISE 12 or later makes the
A Note To The E-mail Admin: This is my third (fourth now!) try on this
reply. I keep getting:
: host
mx.sourceforge.net[216.34.181.68] refused to talk to me: 421
sog-mx-4.v43.ch3.sourceforge.com: Too many concurrent SMTP connections;
please t
On Thu, 28 Feb 2013, Jon Elson wrote:
> Date: Thu, 28 Feb 2013 11:57:04 -0600
> From: Jon Elson
> Reply-To: EMC developers
> To: EMC developers
> Subject: Re: [Emc-developers] hostmot2-firmware build problem
>
> Peter C. Wallace wrote:
>>
>>
>> It should
Peter C. Wallace wrote:
>
>
> It should be noted that while ISE versions 9 and 10 may build Spartan 3
> bitfiles, there is a fair chance that they will not work, so its best to use
> the lastest for Spartan 3 and >
>
Hm, interesting. I'm using ise 10.1 to build bitfiles for Stpartan 3A
and 3
On Thu, 28 Feb 2013, Matt Shaver wrote:
> Date: Thu, 28 Feb 2013 00:50:47 -0500
> From: Matt Shaver
> Reply-To: EMC developers
> To: emc-developers@lists.sourceforge.net
> Subject: Re: [Emc-developers] hostmot2-firmware build problem
>
> On Wed, 27 Feb 2013 21:07:06 -
On 28/02/13 02:25, Matt Shaver wrote:
> 1. I checked out hostmot2-firmware to try out the build.
>
> 2. I have ISE 10.1 Serice Pack 3 installed at /opt/Xilinx/.
>
> 3. I run 'make' and get quite a ways (an hour+), some bitfiles even
> built, and then it stops with:
>
> ./pin.py SV24_144 x20_1000 >
On Wed, 27 Feb 2013 21:07:06 -0800 (PST)
"Peter C. Wallace" wrote:
> It should be noted that while ISE versions 9 and 10 may build Spartan
> 3 bitfiles, there is a fair chance that they will not work, so its
> best to use the lastest for Spartan 3 and >
I'm going to get through the whole build,
On Wed, 27 Feb 2013, Matt Shaver wrote:
> Date: Wed, 27 Feb 2013 22:41:59 -0500
> From: Matt Shaver
> Reply-To: EMC developers
> To: emc-developers@lists.sourceforge.net
> Subject: Re: [Emc-developers] hostmot2-firmware build problem
>
> On Wed, 27 Feb 2013 20:10:00 -0700
On Wed, 27 Feb 2013 20:10:00 -0700
Sebastian Kuzminsky wrote:
> On 02/27/2013 07:25 PM, Matt Shaver wrote:
> > What am I doing wrong?
>
> The 3x20 uses an FPGA that's too fancy for version 10 of ISE, you
> need version 13 or better.
OK, I also have 14.4 installed in /opt/Xilinx. I have edited t
On 02/27/2013 08:41 PM, Matt Shaver wrote:
> On Wed, 27 Feb 2013 20:10:00 -0700
> Sebastian Kuzminsky wrote:
>> The 3x20 uses an FPGA that's too fancy for version 10 of ISE, you
>> need version 13 or better.
> OK, I also have 14.4 installed in /opt/Xilinx. I have edited the
> table in build.py to
On 02/27/2013 07:25 PM, Matt Shaver wrote:
> 1. I checked out hostmot2-firmware to try out the build.
>
> 2. I have ISE 10.1 Serice Pack 3 installed at /opt/Xilinx/.
>
> 3. I run 'make' and get quite a ways (an hour+), some bitfiles even
> built, and then it stops with:
>
> ./pin.py SV24_144 x20_10
1. I checked out hostmot2-firmware to try out the build.
2. I have ISE 10.1 Serice Pack 3 installed at /opt/Xilinx/.
3. I run 'make' and get quite a ways (an hour+), some bitfiles even
built, and then it stops with:
./pin.py SV24_144 x20_1000 > fw/3x20-1/SV24.PIN.tmp
# tempdir /tmp/hm2fQc9g4
# g
12 matches
Mail list logo
