What do you mean by interaction? The LISN functions as a source or load
impedance, depending on how you view noise current flow. To what other
interaction do you refer?
From: Derek Walton lfresea...@aol.com
Organization: L F Research
Reply-To: lfresea...@aol.com
List-Post:
Hi Derek,
You can find information on this, as well as the effects of power supply
filter configurations on LISN measurements in chapter 9 of Clayton
Paul's book an Introduction to Electromagnetic Compatibility. The
ISBN number for this book is 0-471-54927-4.
Wayne Cooke
Hardware Engineer,
Hi everyone,
does anyone have suggestions for a good paper to read in order to fully
understand the interaction between a LISN and an EUT. It seems I find
references, but most need to pe purchased first before learning if they are on
this topic.
I own all the IEEE EMC transactions, but not an
As I recall from the days of my youth in the Military, we had a
simple system that allowed us to have three phones on two wires.
Each end had a center-tapped transformer with the center tap being
connected to Earth ground.
The three conversations were carried line 1 - line 2, line 1 -
In message
be3336be85968d49be01e66d6e365b1e01859...@sjc1amfpew01.am.sanm.corp,
dated Fri, 19 Jan 2007, Tarver, Peter peter.tar...@sanmina-sci.com
writes
This has been circulating on the internet for nearly 10 years (that I'm
aware of). I recall seeing it mentioned on Snopes as an urban myth,
This has been circulating on the internet for nearly 10 years (that I'm
aware of). I recall seeing it mentioned on Snopes as an urban myth, but
that could be wrong (that site is blocked at work as 'entertainment,' so
I can't confirm that at the moment). When I first saw the story, it
mentioned
Dan and Chris,
I'm sorry if I'm a little late on this conversation but, what does the Chinese
recycling mark look like and when does it have to appear on the product?
Thanks for your help in advance.
Joe Burch
TAC,INC.
_
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On
Dan,
Yes I agree about needing to stay labeled with the rest of the herd – I have
seen one PSU supplier state they will be using 25.
Labels – this is the only viable one we have found – they do set specific
periods but have a custom period option too:
http://www.labelident.com
Chris,
It is probably more important that your number falls somewhere near the
average of what other similar products state, that way you don't stick out
which could expose you to further scrutiny. Too bad the appendix isn't
completely filled out with the suggested or average use periods by
It would seem the final version of the “General Rule of EFUP for EIP” will
provide some indicative figures to use for various types of EIP. However for
now we are left with the draft guide available here:
http://www..rohs-international.com/fi
es//General_rule_of_Environment_Friendl
Thanks for all contributions.
I think the result of what you are saying is that the analysis should only
consider the product and a single individual.
If the risk to an individual is substantially low, then the product is safe.
Thanks to John for his observation that religious history shows
Folks
If you or someone you know is interested, please apply through
Eatonjobs.com.
External Job Title Product Certification Engineer - Milwaukee, WI
AutoReqId 16704BR
Group/Division Electrical Group - ECO/ICD
Function
12 matches
Mail list logo