There is provision for an artificial hand in leakage tests. Here, the
user acts as antenna while using the device and if that's the only
radiating "conductor" on a touch panel, that probably should not be
ignored (to avert field problems if nothing else). However, I don't
recall anything requir
Possible - sure. You can get a air powered actuator to touch it, but depending
on whether its resistive or capacitive. If capacitive you will likely have to
build up a little human model pcb for the probe and get it to ground. The air
actuator can be driven outside the chamber, if your air rese
Hi Grace,
1. Both the display (POE Powered Device (PD)) and POE injector (POE
source) should have separate reports. Recommend testing them separately because
the general idea of POE source is to provide power to a device at some distance
from AC mains source. But they could be tested at
Hi Grace,
In regard to your 1st bullet, even though the touchpanel and the POE injector
are sold separately and offered as two separate items, the potential of them
being sold/bundled together with the intent of a single solution coming from a
single manufacturer does exist. I am of the opinion
Dear members,
I would like to add a question to Lin's message. Should the touch panel be
touched during the test (maybe with some moving fixture)?
Dieter Paasche
From: Grace Lin [mailto:graceli...@gmail.com]
Sent: Wednesday, April 04, 2012 7:51 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES]
Hello Regulatory Experts,
Can anyone comment as to the requirement for an NRTL safety listing for
commercial food equipment for use in the subject island countries? These units
would be rated 120 V, 1 ph and either 50 or 60 Hz. Thanks for any input you may
be able to offer.
Good day,
Richard P
On Wed, 4 Apr 2012 08:19:59 +0200,
Niels Hougaard wrote:
> This gives the need for reading the ARIB STD-19 standard or having it
> explained. Until now I have only been able to find it in Japanese; maybe it
> does not exist in an English version.
AFAIK, ARIB STD-19 is available only in Japanes
Dear Members,
Could you please give your comments on the test setup for a display
(touchpanel) powered by a PoE (power over Ethernet) injector? More
specifically:
1. Does the PoE injector need to be part of the EUT (equipment under test)
and placed on the turntable next to the EUT? Or, can the PoE
8 matches
Mail list logo