Hello,
I'll start by saying I don't know when the next version of the Official
Journal (harmonised standards) for the EMC and R%TTE Directives is due out.
For the EMC and RTTE Directives, the last release was 23 October 2012, so
I would expect to see a new version released soon. (Within
Hello all,
I agree with Tom that it only applies to Class B computer peripherals.
However, I thought I'd share an interesting recent experience with you, for
your information.
I sent a KDB to the FCC about a boat (luxury yacht) that had a USB port on
the dashboard (I'm not sure if
Dear Members,
Could you please share your experience and/or knowledge for the ground
plane grounding in the immunity lab?
We plan to layout a L shape ground plane in the 24' x 18' area for ESD,
etc. tests. The corner of the L shape is right next to a 10 wide building
collar. Is a ground strap
You do not need any of them for EMC.
Do as you deem necessary for electrical safety.
Regards,
Ing. Gert Gremmen, BSc
Van: emc-p...@ieee.org [mailto:emc-p...@ieee.org] Namens Grace Lin
Verzonden: Friday, August 23, 2013 3:04 PM
Aan: emc-p...@ieee.org
Onderwerp: Ground Plane
I've always wondered about boats or yachts which spend the bulk of their time
tied up in a harbor next to hundreds if not thousands of other boats or yachts
where people can live in close approximation. So is a harbor considered a
residential area which would require Class B computing devices
Grace:
Welding galvanized steel is not a good idea; toxic zinc fumes.
What is a building collar?
Your immunity lab must be within a shielded enclosure, so it should already
be safety grounded. Since you will be doing ESD testing INSIDE the
enclosure, you will not have to be draining any
Brian:
I should let some other ex-FCC guys comment on this authoritatively, but I
can toss in my observations too.
There is a voluntary EMC standard for vehicles in the USA, but RV's are
built with a split responsibility. A chassis maker (like Ford or
Freightliner of Mercedes) builds a
Grace,
On Fri, 23 Aug 2013 09:03:35 -0400,
Grace Lin graceli...@gmail.com wrote:
Could you please share your experience and/or knowledge for the ground
plane grounding in the immunity lab?
We plan to layout a L shape ground plane in the 24' x 18' area for ESD,
etc. tests. The corner of
Most US mil-standards can be downloaded for free. Is there a similar website
for free def standards?
Thanks
Gary McInturff
Reliability/Compliance Engineer
Esterline Interface Technologies
Featuring
ADVANCED INPUT, GAMESMAN, LRE MEDICAL, and MEMTRON products
600 W. Wilbur Avenue
Back when we did that stuff, used to be able to download from
www.dstan.mod.uk
But I find this site to be much more useful
www.cartoonresearch.com
Brian
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of McInturff,
Gary
Sent: Friday, August 23, 2013 10:21 AM
To:
Grace,
Our lab is used for testing of ITE products to the IEC 55024 (CISPR24) immunity
standard.
We built ours from sheets of 1/4 (6mm) 5052 aluminum, screwed down onto 1
(25mm) plywood, with the plywood then fastened to the building floor. (Our
products are large, heavy, rack-based systems,
Keep in mind that a primary purpose of grounding the plane is electrical safety.
Ghery S. Pettit
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Flavin, John
Sent: Friday, August 23, 2013 11:55 AM
To: emc-p...@ieee.org
Subject: RE: [PSES] Ground Plane Grounding in the Immunity
Psnet,
I've been asked about FLP39 compliance for equipment.
Anyone have any idea as to what this is?
:) br, Pete
Peter E Perkins, PE
Principal Product Safety Engineer
PO Box 23427
Tigard, ORe 97281-3427
503/452-1201 fone/fax
p.perk...@ieee.org
-
Folks,
Wanted to pass this along if you know a ME friend looking to be involved in
development of 802.11 based wireless indoor and outdoor AP’s, wireless
broadband routers and switch products in Sunnyvale, California.
Details for the position can be viewed at
Dare we think that it's the
Finsbury Local Plan: Statement of legal compliance [Document reference:
FLP39]
See
http://www.islington.gov.uk/publicrecords/library/Planning-and-building-cont
rol/Publicity/Public-consultation/2012-2013/(2012-10-23)-Response-to-Inspect
In message
beec1fc38f37bc4da6df70db9d7d0e3608d9c...@sushdc8002.td.teradata.com,
dated Fri, 23 Aug 2013, Flavin, John john.fla...@teradata.com
writes:
Our lab is used for testing of ITE products to the IEC 55024 (CISPR24)
immunity standard.
Not IEC 55024, which does not exist, but EN 55024.
16 matches
Mail list logo