Hi all
I have been asked about approvals of electronic road signs and traffic
lights in EU. The system is mostly build of CE marked equipment, but I'm
not sure which standards to use for CE approval. Can some one help me ?
Kim Jensen
---
This message is
Hi all
Can some one give me links to information regarding EU Medical Devices
directive.
My problem is to define the requirement for the following situation:
A manufacturer is making an add-on device for another company's medical
device and the total equipment is CE approved without involving t
Hi all,
I have been asked if a laser which will be sold as a component will have to
be FDA approved. IEC 825 does not include lasers which are components, only
end-user products.
I can't understand the FDA requirements concerning components.
The laser is a Class 3B laser
Please send me a clear
Dear Ken
In EN 60950 and UL1950 appendix D you can find a description on how to
measure leakage current and the specifications for the meter. This is taken
from another standard which I don't know the number of. If you don't use a
meter with the right data you will never know what is the right
Hi all,
I can't find the answer to the following questions in the information I
have from FCC I hope that sombody can help me.
We have both FCC part 15 certified products and FCC part 68 certified
products. Now a OEM costumer wants to have our product with his name on FCC
certified. Both a produ
Here are my results from test performed 14/9 2000:
PC: Dell Dimension L566CX ; Model MCM
Monitor: Dell 15" Model E770p
FCC and CE approved all components
The PC cabinet is very good, but CD-ROM had to be grounded by EMC/Cu gasket
arround the front. The it was very good with a margin of more tha
Dear all,
I'm looking for a software which can read and "manipulate" data from my
Anritsu MS2601A spectrum analyzer.
The only software I know is EMIscan which cost more than a HAMAG spacrtum
analyzer including a very good software, so it must be cheaper than $3.000
Best regards,
Kim Boll Jens
Dear all
I'm still confused by the answers I have got concerning the languages of
the DoC. I still understand what I'm reading as if I need to provide the
DoC in all legal EU language if I want to sell my product in all EU
countries.
Here are my references:
R&TTE directive (L91/16) Article 6
Dear group,
Can anyone tell me that CS in a circle represent. I have seen it on a
fuseholder with UL and CSA approval and then this CS.
Best regards,
Mr. Kim Boll Jensen
Denmark
-
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to
--
Fra: Kim Boll Jensen
Sendt: 17. september 1998 08:55
Til: [SMTP: emc-p...@ieee.org]
Emne: SV: Safety concerns w/ Reed Switches
I have benn into the same problems. We droped using Reed Switches for
safety interlocks. One reason is that our products have to comply to the
Mach
A fools paradise or not I don't know but to say that it is only secondary
circuits that radiates is not true. I have several switch mode power
supplies which have radiated emission up to 150MHz. Especially from 40 -
100MHz I often see problems. This emission is normally very sensitive to
Just a few EMC "stories" about firewire.
We use an 10m long firewire between two parts of one of our products. The
female connectors had to be improved for ground connection by small metal
"clips" which both reduced HF emission and improved immunity for fast
transient according to EN 6100
Dear groupe,
Does anyone have some good idears about designing a simple filter for
surges (the kind of surges that comes from testing according to IEC
61000-4-5)
I was thinking about using an inductor, a capacitor and a MOV. But, what
is the requirements for the inductor ? and will it gi
Dear Ed,
Try;
Belden Montreal
4150 Ste. Catherine Ouest, Suite 420
Westmount, Quebec H3Z 2Y5
Phone 514-935-6372
Fax: 514-935-5706
or
Carol cables
Best regards,
Mr. Kim Boll Jensen
ScanView, Denmark
Dear all,
I find it a little wast of time to read about seminars and job's in parts
of the world where I never will come. Could we all try to include an
indication in the beginning of the mail of where in the world jobs and
training happens. Also for you Americans I'm not familiar with yo
Dear Jong-Ho Lee and groupe,
(We have had our spring here i Denmark this winter and now when the
spring is comming the temperatur is dropping to winter temp. ? I think
there are a fault in the weather regulation some where, but who will fix
it ?)
Here are some answers to your question se
concerning 1.
You can get this information from the CB bulletin which your national
agency normally can send you. You shal use issue NO. 89A I, December 1996
2. It is Japan which have this deviation and not Korea. Korean deviations
deals with supply voltage, they have changed to 220 V /
Can anyone help me with some kind of report form for IEC 1010-1, I need
it for my CE technical file. I would like it in MS word or WP format if
possible.
Can it be downloaded from somewhere on the net ?
Best regards,
Mr. Kim Boll Jensen
ScanView A/S
Does anyone have a circuit diagram or description of a good design for a
safety interlock circuit which will comply with IEC 950.
We have a system of serial connected switches (SAIA safety interlock type)
and they can give a 5V signal to a circuit which shall switch off a 48V and
a 12V.
The ci
Microsoft Mail v3.0 IPM.Microsoft Mail.Note
Fra: Kim Boll Jensen
Til: 'SMTP: emc-p...@ieee.org'
Emne: FCC label for DoC equipment ?
Dato: 1997-12-11 11:31
Prioritet:
Brev-id: B992BD4B
Samtale-id: B992BD4B
--
Can anyone
20 matches
Mail list logo