Peter,
The metrics we use to specify the more complex surge waveshapes are
only a modest improvement over the answer a red one to the what car
do you drive? question.
The ring and possibly 8/20 (part of the combination) waveshapes
have current reversals, which complicates matters.
In message f116faaea7ea08f9e625b495e972e...@mail.gmail.com, dated Fri,
21 Aug 2015, Peter Tarver ptar...@enphaseenergy.com writes:
I'm wondering if others have experienced cases where different
manufacturers' surge test equipment (ANSI/IEEE C62.41 ring and
combination waves) with nearly
David -
Thank you.
In one case, the output was after the CDN. In the other, the CDN was not in
the circuit. I will ask for calibration screen captures with and without
the CDN on both cases. This could prove informative.
Regards,
Peter Tarver
-Original Message-
From: Schaefer,
-
From: Peter Tarver [mailto:ptar...@enphaseenergy.com]
Sent: Friday, August 21, 2015 1:51 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Different surge test equipment, different results
Good morning.
I'm wondering if others have experienced cases where different manufacturers'
surge test
Good morning.
I'm wondering if others have experienced cases where different
manufacturers' surge test equipment (ANSI/IEEE C62.41 ring and
combination waves) with nearly identical open-circuit voltage and
short-circuit current calibrations have led to very different results. In
these cases,
6038
Fax: 651 638 0285
-Original Message-
From: Peter Tarver [mailto:ptar...@enphaseenergy.com]
Sent: Friday, August 21, 2015 1:51 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Different surge test equipment, different results
Good morning.
I'm wondering if others have experienced
6 matches
Mail list logo