mid | Schneider Electric | Solar Business | CANADA |
Regulatory Compliance Engineering
From:
don_borow...@selinc.com
To:
EMC-PSTC@LISTSERV.IEEE.ORG
Date:
01/25/2012 08:09 AM
Subject:
Re: [PSES] Power Amp for IEC 61000-4-16
Ken-
I have not only one, but two amplifiers that start at 10
SA
From: Ken Javor
To:
Date: 01/24/2012 08:33 PM
Subject: Re: [PSES] Power Amp for IEC 61000-4-16
Sent by: emc-p...@ieee.org
I?m not familiar with the 61000-4-16 standard and its limit. If the limit
is flat and requires 30 Vrms oc output at 150 kHz, that would indeed be
e: I
have made my views known to at least one US member of the relevant IEC
committee.
Donald Borowski
EMC Compliance Engineer
Schweitzer Engineering Labs
Pullman, WA, USA
From: Ken Javor
To:
Date: 01/24/2012 08:33 PM
Subject: Re: [PSES] Power Amp for IEC 61000-4-16
Sent by:
kHz. So the audio amp need only have flat performance out to 10 kHz, and
they will all do that.
Ken Javor
Phone: (256) 650-5261
From:
Date: Tue, 24 Jan 2012 17:06:27 -0800
To:
Subject: Re: [PSES] Power Amp for IEC 61000-4-16
1% THD all the way to 150kHz? Just wondering if the older
From:
Ken Javor
To:
EMC-PSTC@LISTSERV.IEEE.ORG
Date:
01/24/2012 03:45 PM
Subject:
Re: [PSES] Power Amp for IEC 61000-4-16
Any decent quality audio power amplifier will have THD below 1% these
days.
Consider using a step-up transformer such as the Solar Electronics 8810-1.
It is designed to
Any decent quality audio power amplifier will have THD below 1% these days.
Consider using a step-up transformer such as the Solar Electronics 8810-1.
It is designed to impedance match from 1.5 Ohms to 50 Ohms, and can handle
200 Watts. That will more than suffice for your needs.
Ken Javor
Phon
A new testing requirement for some of my company's products is IEC
61000-4-16 Conducted Common Mode Disturbances. I need to test from 10 kHz
to 150 kHz.
I have a good low distortion signal source, but I need a power amplifier
to give me the signal at the test level: 30 Vrms open circuit, 50±5 o
7 matches
Mail list logo
