March 2015 15:02
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Quasi Peak - Length of Measurement Time for Final Spot
Measurement?
Dear group,
When measuring emissions using a Quasi Peak detector are there any
regulations or guidance concerning the amount of time one should dwell
Thank you to everyone who responded and clarified the issue, it is much
appreciated.
Regards,
James
From: Pawson, James
Sent: 26 March 2015 15:02
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Quasi Peak - Length of Measurement Time for Final Spot
Measurement?
Dear group,
When measuring
: Re: [PSES] Quasi Peak - Length of Measurement Time for Final Spot
Measurement?
James,
Since you are aware of it, you need to make sure you capture the max reading.
Rob Oglesbee
Radian Research
(765) 449-5505
This message, and any attachments to it, may contain information
San Jose, CA 95119-1003
ravinder.ajm...@hgst.commailto:ravinder.ajm...@hgst.com
From: dward [mailto:dw...@pctestlab.com]
Sent: Thursday, March 26, 2015 9:11 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Quasi Peak - Length of Measurement Time for Final Spot
Measurement?
Yes, worst case
In message
99532047d6a52847ab271f822ae9efdc0177713...@cktexmb01.cds.int, dated
Thu, 26 Mar 2015, Paasche, Dieter dieter.paas...@christiedigital.com
writes:
with the
exception of any brief isolated high reading, which shall be ignored
Too vague. Bad standard! Go to the naughty step.
--
OOO
...@echostar.com]
Sent: Thursday, March 26, 2015 11:02 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Quasi Peak - Length of Measurement Time for Final Spot
Measurement?
Dear group,
When measuring emissions using a Quasi Peak detector are there any regulations
or guidance concerning the amount
Dear group,
When measuring emissions using a Quasi Peak detector are there any regulations
or guidance concerning the amount of time one should dwell on a single
frequency for a measurement?
I know it depends on the nature of the signal. In this case, the signal of
interest results in a burst
In message
cec6039c09630543852b1a8cfa0a0c790e0a3...@stwpiexc03.sats.corp, dated
Thu, 26 Mar 2015, Pawson, James james.paw...@echostar.com writes:
When measuring emissions using a Quasi Peak detector are there any
regulations or guidance concerning the amount of time one should dwell
on a
and delete the message and any attachments. Thank you.
From: Pawson, James [mailto:james.paw...@echostar.com]
Sent: Thursday, March 26, 2015 11:02 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Quasi Peak - Length of Measurement Time for Final Spot
Measurement?
Dear group,
When
9 matches
Mail list logo
