In message <34C449781DB0418B8509F64FA4FA3967@Pete97219Compaq>, dated
Mon, 27 May 2013, Pete Perkins writes:
The large, flat British plug seems to follow the 'perversity of
nature' rule and drop 'butter side down' with the pins in the palm of
your hand most of the time - thereby providing the
Brian, et al,
A histerical, er - historical, review...
In an internationally harmonized standard all expected issues must
be considered. The primary driving factor for the cap discharge test on the
power input pins has been driven by the British over the years.
The la
,
Rich
On 5/21/2013 9:33 AM, Kunde, Brian wrote:
What we call the Capacitor Discharge Test in the IEC 61010-1 standard section
6.10.3 says that voltage across the pins of the power cord must not be
Hazardous Live 5 seconds after disconnection from the supply. Most labs simply
check to see if
]
Sent: Tuesday, May 21, 2013 10:50 PM
To: Kunde, Brian; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: Capacitor Discharge Test IEC 61010-1
A few decades ago when an intern, called co-op back then, a customer complaint
came in that they had been shocked by the power plug after pulling it from the
wall
details were for the Safety engineers.
>
> From: "Kunde, Brian"
>To: "EMC-PSTC@LISTSERV.IEEE.ORG"
>Sent: Tuesday, May 21, 2013 12:33 PM
>Subject: Capacitor Discharge Test IEC 61010-1
>
>
>What we call the Capacito
What we call the Capacitor Discharge Test in the IEC 61010-1 standard section
6.10.3 says that voltage across the pins of the power cord must not be
Hazardous Live 5 seconds after disconnection from the supply. Most labs simply
check to see if the voltage across the pins are 60 volts or less at
, 2001 01:32
To: 'marti...@appliedbiosystems.com'; emc-p...@majordomo.ieee.org
Cc: Marcus Murphy
Subject: RE: Capacitor Discharge Test
Martin
Having read several other contributors comments on your question, I have to
say that I totally agree with them (test with the switch in both posi
-
From: owner-emc-p...@ieee.org [mailto:owner-emc-p...@ieee.org]On Behalf
Of Allen, John
Sent: Monday, May 14, 2001 2:32 PM
To: 'marti...@appliedbiosystems.com'; emc-p...@majordomo.ieee.org
Cc: Marcus Murphy
Subject: RE: Capacitor Discharge Test
Martin
Having read several other cont
ision
Bracknell, UK
-Original Message-
From: marti...@appliedbiosystems.com
[mailto:marti...@appliedbiosystems.com]
Sent: 11 May 2001 17:31
To: emc-p...@majordomo.ieee.org
Subject: Capacitor Discharge Test
We evaluate our laboratory equipment to UL 3101-1, CSA 1010.1 and EN
61010-1.
Section 6
Greetings Joe and everyone,
I can't speak for lab equipment, but I know that for UL 1950 (EN
60950/ IEC 950) my former employer (a recent NRTL who works/worked
closely with the biggest) would always test with the mains switch both
on and off. If you think about it, it makes sense to test with
...@appliedbiosystems.com
Sent: Friday, May 11, 2001 12:31 PM
To: emc-p...@majordomo.ieee.org
Subject: Capacitor Discharge Test
We evaluate our laboratory equipment to UL 3101-1, CSA 1010.1 and EN
61010-1.
Section 6.10.3 of UL 3101-1 states "If plug pins of cord-connected
equipment receive a c
)
Subject: Capacitor Discharge Test
We evaluate our laboratory equipment to UL 3101-1, CSA 1010.1 and EN
61010-1.
Section 6.10.3 of UL 3101-1 states "If plug pins of cord-connected
equipment rece
We evaluate our laboratory equipment to UL 3101-1, CSA 1010.1 and EN
61010-1.
Section 6.10.3 of UL 3101-1 states "If plug pins of cord-connected
equipment receive a charge from an internal capacitor, the pins shall not
be HAZARDOUS LIVE 5s after disconnection of the supply". We have always
perf
13 matches
Mail list logo
