To: emc-p...@ieee.org
Cc: Robert Keller
Subject: Current limit for Dielectric Test
Hello Group,
I have a question regarding the Electric Strength test in 60950-1
section
5.2. It says in that section that you have a failure or the insulation
are specifically designed to
detect arcs for any value of test current.
Best regards,
Rich
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Robert F. Keller
Sent: Thursday, November 13, 2008 8:36 AM
To: emc-p...@ieee.org
Cc: Robert Keller
Subject: Current limit for Dielectric Test
, 2008 10:20 PM
Aan: 'Ted Eckert'; 'Robert F. Keller'; EMC-PSTC@LISTSERV.IEEE.ORG
Onderwerp: RE: Current limit for Dielectric Test
Hi Folks
From experience, I agree with what Ted says - especially w.r.t. his last
paragraph about setting a LOWER limit.
Failure to exceed the lower limit
Hello Group,
I have a question regarding the Electric Strength test in 60950-1 section 5.2.
It says in that section that you have a failure or the insulation broke down
when the current which flows as a result of the application of the test
voltage rapidly increases in an uncontrolled manner.
Engineer
Microsoft Corporation
ted.eck...@microsoft.com
The opinions expressed are my own and do not necessarily reflect those of my
employer.
From: Robert F. Keller [mailto:r...@cclab.com]
Sent: Thursday, November 13, 2008 8:36 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Current limit
...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of
Robert F. Keller
Sent: Thursday, November 13, 2008 8:36 AM
To: emc-p...@ieee.org
Cc: Robert Keller
Subject: Current limit for Dielectric Test
Hello Group,
I have a question regarding the Electric Strength test in 60950-1
section 5.2. It says
In message 491c5758.8090...@cclab.com, dated Thu, 13 Nov 2008, Robert
F. Keller r...@cclab.com writes:
I have a question regarding the Electric Strength test in 60950-1
section 5.2. It says in that section that you have a failure or the
insulation broke down when the current which flows as
Of Ted
Eckert
Sent: 13 November 2008 16:51
To: Robert F. Keller; EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: Current limit for Dielectric Test
Hello Rob,
There is no current limit specified, and there is no way a limit could
8 matches
Mail list logo