>During a quality inspection in my lab the inspector
>I've got a non-conformity due to the lack of resistivity check on the
>470 Kohm resistor employed to connect the reference plane of the ESD table
>to the ground.
>This is required according to EN 61000-4-2
>Could anyone give me some hints in
The "standard" anti ESD wrist strap used by electronic assemblers etc. to
avoid electrostatic build-up on their bodies also has a resistance of about
that value (1 Mohm) to ground.)
This resistance value is chosen as a compromise to be both low enough to
prevent ESD build up, but also to be high e
Original Message-
From: Rossi Giuseppe [SMTP:g.ro...@crf.it]
<mailto:[SMTP:g.ro...@crf.it]>
Sent: Monday, November 22, 1999 9:09 AM
To: emc-p...@majordomo.ieee.org
<mailto:emc-p...@majordomo.ieee.org>
Subject: ESD EN 61000-4-2 que
During a quality inspection in my lab the inspector
I've got a non-conformity due to the lack of resistivity check on the
470 Kohm resistor employed to connect the reference plane of the ESD table
to the ground.
This is required according to EN 61000-4-2
Could anyone give me some hints in order
4 matches
Mail list logo
