In message
<74ff013b0701290719k6cb34412o25a1854da8218...@mail.gmail.com>, dated
Mon, 29 Jan 2007, Jon Griver writes
>It is clear that such a device would have great difficulty complying
>with EMC requirements, so clause 36 of IEC 60601-2-36, the particular
>standard for lithotriptors, states
Paolo -
Not knowing what electroporation is and being curious, I did some internet
poking around. Electroporation is an in-vitro process that uses high
voltages. Wikipedia, for instance, mentions use of pulsed 2,400 V, when
working with bacteria. See
http://en.wikipedia.org/wiki/Electroporatio
John,
You will be happy (or maybe not) to know that this approach is still alive and
kicking with regard to medical equipment. A lithotriptor is a medical device
used to break up kidney stones. Its method of operation is to produce shock
waves in water by what is basically a spark plug. It is cle
-p...@ieee.org
Sent: Mon, 29 Jan 2007 14:55:54 +0200
Subject: Re: electroporation device safety requirements
> Paolo,
>
> I think that you will have to rely on the leakage current
> requirements of the base standard, IEC 60601-1. The only particular
> standard which may have rele
In message <20070129134628.m27...@elen.it>, dated Mon, 29 Jan 2007,
Paolo Peruzzi writes
>Without any particular perscription, does it mean one can deliver
>energy without limits, provided the system is in compliance with IEC
>60601-1 and it's succesfully validated for the particular intended
Paolo Peruzzi
Regulatory Engineer
El.En. S.p.A.
Via Baldanzese, 17
50041 Calenzano (FI)
Italy
Tel. +39 055 8826807
FAX +39 055 8832884
http://www.elengroup.com/
From: "Jon Griver"
To: emc-p...@ieee.org
Sent: Mon, 29 Jan 2007 14:55:54 +0200
Subject: Re: electroporation device saf
Paolo,
I think that you will have to rely on the leakage current requirements of the
base standard, IEC 60601-1. The only particular standard which may have
relevance could be IEC 60601-2-2, PARTICULAR REQUIREMENTS FOR THE SAFETY OF
HIGH FREQUENCY SURGICAL EQUIPMENT. You would have to check out t
7 matches
Mail list logo