would fit in the palm of one's hand! But it quickly became
obvious that these units were actually the same as the old mW/cc.
Bob Wilson
TIR Systems Ltd.
Vancouver.
-Original Message-
From: TM66 [mailto:t...@rcn.com]
Sent: June 21, 2002 11:12 AM
To: Robert Wilson
Subject: Re: SI Unit
On Fri, 21 Jun 2002 12:33:04 -0500,
Ken Javor ken.ja...@emccompliance.com wrote:
I would agree with the discussion below from a practical standpoint, but the
original question referred to SI (International System) units so the answer
is and must be cubic meters. SI is based on MKSA -
yet.
Bob Wilson
TIR Systems Ltd.
Vancouver.
-Original Message-
From: Chuck Mullett [mailto:chuck.mull...@onsemi.com]
Sent: June 21, 2002 9:15 AM
To: richwo...@tycoint.com
Cc: emc-p...@majordomo.ieee.org
Subject: Re: SI Unit for volume
Yep, cubic meters, of course. Don't forget
[mailto:robert_wil...@tirsys.com]
Sent: Friday, June 21, 2002 12:27 PM
To: richwo...@tycoint.com; emc-p...@majordomo.ieee.org
Subject: RE: SI Unit for volume
Only if it applies to fluid volume. If it applies to volume of a solid,
then it is traditional to use cubic centimeters, or even m^3. The latter
is a heck
: June 21, 2002 11:12 AM
To: Robert Wilson
Subject: Re: SI Unit for volume
Bob,
W/cc is multiple of KW/m^3.
1 KW = 1,000 W and 1 m^3 = 1,000,000 cc
therefore:
1 KW/m^3 = 1,000 W/1,000,000 cc = 0.001 W/cc or
1 W/cc = 1,000 KW/m^3
Robert Wilson wrote:
...
For example, in the latest Ferroxcube
.
Vancouver.
-Original Message-
From: richwo...@tycoint.com [mailto:richwo...@tycoint.com]
Sent: June 21, 2002 5:28 AM
To: emc-p...@majordomo.ieee.org
Subject: SI Unit for volume
When stating a cubic volume in SI units, is liters the correct unit. If
not,
what is the correct method
: WOODS, RICHARD
Sent: Friday, June 21, 2002 8:28 AM
To: 'emc-pstc'
Subject: SI Unit for volume
When stating a cubic volume in SI units, is liters the correct unit. If
not, what is the correct method of expression?
Richard Woods
Sensormatic Electronics
Tyco
I believe the SI unit for volume is the cubic metre. A litre is 1/1000 of a
cubic metre and not strictly speaking an SI unit.
I wouldn't try asking for one thousandth of a cubic metre of engine oil at a
service station though
Chris Colgan
Compliance Engineer
TAG McLaren Audio Ltd
, Scotland, DD2 4SW
E-Mail :john.cr...@scotland.ncr.com
Tel: +44 (0)1382-592289 (direct ). Fax +44 (0)1382-622243.
From: richwo...@tycoint.com [mailto:richwo...@tycoint.com]
Sent: 21 June 2002 13:33
To: emc-p...@majordomo.ieee.org
Subject: RE: SI Unit for volume
Nevermind. I found the answer
Nevermind. I found the answer to be cubic meters.
-Original Message-
From: WOODS, RICHARD
Sent: Friday, June 21, 2002 8:28 AM
To: 'emc-pstc'
Subject: SI Unit for volume
When stating a cubic volume in SI units, is liters the correct unit. If
not, what
When stating a cubic volume in SI units, is liters the correct unit. If not,
what is the correct method of expression?
Richard Woods
Sensormatic Electronics
Tyco International
---
This message is from the IEEE EMC Society Product Safety
Technical
11 matches
Mail list logo