11, 2002 8:34 PM
To: Chris Chileshe; emc-p...@majordomo.ieee.org
Subject:Re: Testing for dry joints
Chris,
So I give up - just what exactly is a dry joint?
Scott
At 09:55 AM 10/9/2002 +0100, Chris Chileshe wrote:
>Hi Group,
>
>Probably not the appropriate forum but here goes anyway.
>
Thank you everyone for your very informed replies on the subject.
'Endurance' and 'use' does indeed involve vibration. The units are used
on off-highway heavy duty vehicles and forklifts. The contacts are not
gold-plated and I am glad I didn't make that clear because the info
forthcoming (Thank
I read in !emc-pstc that Chris Chileshe
wrote (in <01c26f7a.00510c40.chris.chile...@ultronics.com>) about
'Testing for dry joints' on Wed, 9 Oct 2002:
>The specific problem is that the joints appear to be electrically
>sound to start with, meaning the units are getting t
Dear Chris,
If I remember correctly from my days in Britain's National Coal Board,
thermal imagers and other temperature sensors were used to check cable
joints underground. Poor connections had a higher resistance, and were thus
hotter, than their neighbours. I don't know whether such a test met
To: emc-p...@majordomo.ieee.org
Subject: Testing for dry joints
Hi Group,
Probably not the appropriate forum but here goes anyway.
A colleague is finding numerous problems with subtle dry
joints (partial) between connectors and PCBs and is wondering
if there is a way - short of new procedures
Hi Group,
Probably not the appropriate forum but here goes anyway.
A colleague is finding numerous problems with subtle dry
joints (partial) between connectors and PCBs and is wondering
if there is a way - short of new procedures in process control - that
dry joints can be tested for?
The spe
6 matches
Mail list logo