> --
>
> Message: 6
> Date: Thu, 10 Jan 2008 20:34:29 -0600
> From: "John Crane" <[EMAIL PROTECTED]>
> Subject: Re: [Emc-users] nc programming application
> To: "Enhanced Machine Controller (EMC)"
>
> Message-ID:
> <[EMAIL PROTECTED]>
> Content-Type: tex
Gentlemen,
I am trying to get the nc application to run with a script. I have
a script, written by cradek, to run an .apt program in the background
against apt360 and write it into the control. Chis' works well.
Here is my attempt:
#!/bin/sh
gnome-terminal -e krisnc
exit 0
This opens t
Hi John,
I can't think of any possible reason why it would work with a pyvcp button,
but not when using the parport.
> Has anyone used M66 with a parport input?
>
> I seem to be unable to make it work with a hardware input.
> I have made it work using a pyVCP button.
> I'm told that it works so
Has anyone used M66 with a parport input?
I seem to be unable to make it work with a hardware input.
I have made it work using a pyVCP button.
I'm told that it works so I must not be able to figure it out.
What I have done so far is documented here:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?
FYI, I have a new page on my website containing my notes on the KBIC
motor controller.
I am starting to think about how EMC could reverse motor direction.
Maybe a standard H-bridge connected to the armature connections, A+ and
A-? The KBIC manual indicates that the armature output cannot be
disco
It would be nice if someone would put up an image somewhere which could
just be written to a flash drive - it would save other people a lot of
trouble and would probably save us from having a lot of questions on the
list when people's compilations go wrong...
--
Best wishes,
Ian
On 11 Jan 2008 at 6:33, [EMAIL PROTECTED] wrote:
Thanks for the information Alex, I just assumed that M66 was real time...
I still wish I had an example of it so I could see why it won't work for me...
Thanks
John
> I can't think of any possible reason why it would work with a pyvcp
> button, b
On Fri, 11 Jan 2008 14:47:44 -0800, you wrote:
>FYI, I have a new page on my website containing my notes on the KBIC
>motor controller.
>
>I am starting to think about how EMC could reverse motor direction.
>
>Maybe a standard H-bridge connected to the armature connections, A+ and
>A-? The KBIC ma
On Sat, 2008-01-12 at 00:01 +, Steve Blackmore wrote:
> I use KBIC speed control on my mill, I simply reverse the DC output
> using a 20A DP/DT relay.
You don't switch it while the motor is running, do you? The KBIC manual
says that you will damage the controller by doing that. I have had
ano
Stuart,
I did download the header file and had it in the same directory, but I
found the problem. My compiler wasn't set up correctly. Thanks for
the support.
On Jan 11, 2008 9:01 AM, Stuart Stevenson <[EMAIL PROTECTED]> wrote:
> > --
> >
> > Message: 6
> > Date: T
Hi Dave. Could you tell me how u configured Classicladder to use the MODBUS
interface? Did you need to specify the port on the comandline? The first leg of
adaption is going well (meaning classicladder V7.123 starts and works with HAL
pins) but I dont have any MODBUS equipment right now, so I n
On Fri, 11 Jan 2008 16:28:14 -0800, you wrote:
>On Sat, 2008-01-12 at 00:01 +, Steve Blackmore wrote:
>
>> I use KBIC speed control on my mill, I simply reverse the DC output
>> using a 20A DP/DT relay.
>
>You don't switch it while the motor is running, do you? The KBIC manual
>says that you w
12 matches
Mail list logo
