Looks neat -- too bad I have no use for it :-P
If you have the comp file and you want to view the documentation, just
run
comp --view-doc gear4.comp
If you want to install it so that it is viewable with "man gear4",
execute
comp --install-doc gear4.comp
(If you're not using run-installed,
Gentlemen,
This is my gear shifting component. It probably is not the best
and may not be completely functional. I will test it on my machine
this week. It is somewhat functional on a sim machine.
I have included it here as it is not too lng. It comps
successfully and the pins show up i
I'm pleased to announce the next bugfix release of the EMC 2.2 series,
version 2.2.5. This version fixes user-reported problems and adds a new
hardware driver.
The new packages are now available in the package repository. If you
already installed 2.2.0 or 2.2.1, this is available as an update.
NI makes a 96 I/O pci card. I picked one up off ebay and it has been
sitting here for a couple of years.
If anyone is interested contact me off list.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/14331
I have the card and the dual 1 m cables but not the connector block.
Dave
On Apr 27, 2008,
--- [EMAIL PROTECTED] wrote:
From: John Kasunich <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Classicladder
Date: Sat, 26 Apr 2008 13:17:00 -0400
Dave Keeton wrote:
> Thats OK Chris...I'm just trying to find a way to expand the I/O
> capabilities of EMC
[EMAIL PROTECTED] wrote:
> Hi
> I am sure that machine shop people are different people and standard
> pendant must be there and also rigid and robust system is important. One
> glitch is software may cost to machine shop $ 100 K as a scrap part.
> Involving 3rd party software such as X-key will c
Hi
I am sure that machine shop people are different people and standard
pendant must be there and also rigid and robust system is important. One
glitch is software may cost to machine shop $ 100 K as a scrap part.
Involving 3rd party software such as X-key will contribute a lot to
glitches one aft
It seems quite straight-forward to connect it to a parport, and use the
motion inputs for jogwheels & selects (you probably need a mux or demux,
I didn't look too closely).
Regards,
Alex
On Sun, 2008-04-27 at 10:52 -0600, [EMAIL PROTECTED] wrote:
> Hi
> I have MPG4-6Axis pendant.
> http://www.cnc
[EMAIL PROTECTED] wrote:
> Hi
> I have MPG4-6Axis pendant.
> http://www.cnc4pc.com/Store/osc/product_info.php?products_id=162
> It build with high level of craftsmanship.
> I am interesting if any one manage to plug MPG4-6 to EMC2with db25 connector?
> I an sure that CNC4PC pendant will move EMC2 c
Hi
I have MPG4-6Axis pendant.
http://www.cnc4pc.com/Store/osc/product_info.php?products_id=162
It build with high level of craftsmanship.
I am interesting if any one manage to plug MPG4-6 to EMC2with db25 connector?
I an sure that CNC4PC pendant will move EMC2 closer to the commercial type
controll
Hi Kirk,
Kirk Wallace wrote:
> On Sat, 2008-04-26 at 21:58 -0500, Chris Radek wrote:
>
>> On Sat, Apr 26, 2008 at 10:35:45PM -0400, John Kasunich wrote:
>>
>>> TrueTypeTracer That is how the Axis sample was made, and how I made
>>> this plate for my stepson.
>>> http://willepadnos.net
yes it was problem in BIOS sttting. Everything OK now
Thanks
Aram
> have you changed the boot order in the computer's BIOS settings to make it
> boot from the CD? if this is set to only look on the hard drive or floppy
> and not the cd, it wouldnt work.
>
> On Sat, Apr 26, 2008 at 1:05 PM, <[EM
I like your way of thinking. Don't forget to aticipate any audio
processing blocks in between your software and sound card output. There
are many processors and filters on the input ADC for example. I don't
believe there is much of anything on the output path, but I would check.
You will probably w
On Sat, 2008-04-26 at 21:58 -0500, Chris Radek wrote:
> On Sat, Apr 26, 2008 at 10:35:45PM -0400, John Kasunich wrote:
> >
> > TrueTypeTracer That is how the Axis sample was made, and how I made
> > this plate for my stepson.
> > http://willepadnos.net/jmkasunich/mahan-plate-1824.jpg
> >
> >
14 matches
Mail list logo
