I committed some changes to TRUNK that let you load a tool, set
tool offset, turn on the spindle, turn on coolant, etc., in MDI or
manual mode, and then resume in the middle of a program.
Previously, resuming the program reset some of the machine setup
including turning off the coolant.
Also,
Great debug output! That really helps.
(Though the Error file is a bit confusing, it looks like you've pasted
several runs in there, without breaks. Not the end of the world.)
Look on line 7 of the HAL file and lines 492 and 555 of the Error file.
You're loading m7i43_hm2, instead of
I was wondering why you wouldn't have the spindle/coolant/tool selection etc
start automatically when resuming?
Or do you mean it does but you can also change these things and resume?
Chris Morley
Date: Thu, 9 Oct 2008 09:28:07 -0500
From: [EMAIL
Hi,
I just wrote some VIM syntax file for rs274ngc.
Maybe this is useful for somebody else, too, so I'm posting it here.
http://bu3sch.de/gitweb?p=cnc.git;a=blob_plain;f=rs274ngc_syntax.vim;h=7db0a3379f61e626e3ff9bca019091aa76651354
I use this with the pablo colorscheme in gvim.
I find this way
Hello,
I made button HomeAll, but have the problem with it yet.
I am able to press this buttom anytime.
Ofcouse some time I get error on button pressing.
So is it possible to disable button, when it is impossible to run MDI command
like botton GO in MDI panel?
Evgeny
-Original
Stuart Stevenson wrote:
Can I effectively bypass the SCR tuning by increasing the gain a
lot (much past what the motor can handle) and using the tuning in EMC
to control the motor. Could this turn the SCR into a dumb amp.
thanks
Stuart
What is the source of the feedback? Is it the motor
Karl,
Have you worked with the KURT package?
I am in Wichita, Heaven(Kansas). Not much of a drive. If you are in
Wichita - stop by and see what we are doing.
On Thu, Oct 9, 2008 at 3:10 PM, Karl Schmidt [EMAIL PROTECTED] wrote:
Stuart Stevenson wrote:
Can I effectively bypass the SCR