Am 15.12.2011 um 02:07 schrieb alice:
- Original Message -
From: alice
To: emc-users-requ...@lists.sourceforge.net
Sent: Wednesday, December 14, 2011 7:55 PM
Subject: also
was thinking about this what if one was to attach a synchronus steppe as an
encoder one could under
On 15 December 2011 01:15, Dan Field danfi...@roadrunner.com wrote:
1 ea 2465 DMS
1 ea 2465
1 ea 2245A
Which one should a garage hobbiest keep? :-)
I don't know, but you might find some information (and probably the
manual) here at what appears to be a Tek Scope Wiki.
On 12/14/2011 01:30 PM, andy pugh wrote:
On 14 December 2011 17:31, cogomancogo...@optimum.net wrote:
I don't know how accurate the waveform is, and 25 MHz doesn't sound like
much, but it's fast enough to measure the speed of light
On 12/14/2011 02:27 PM, gene heskett wrote:
According to the blurb, DESCRIPTION: THIS IS A NEW TEKTRONIX VARIABLE
OFFSET P6231 ACTIVE PROBE 1.5 GHz IN MANUFACTURER PACKAGING. SOME HOLES
IN PACKAGING, INSTRUCTION MANUAL INCLUDED, ALL ACCESSORIES ARE STILL
SEALED (SEE PICTURES). SOLD AS-IS.
On 12/14/2011 03:46 PM, Dave wrote:
On 12/14/2011 11:38 AM, Mark Wendt wrote:
On 12/14/2011 11:29 AM, Dave wrote:
Why, that's just a few years younger'n my dinosaur! ;-)
Mark
If you can afford the cash, the newer portable portable digital scopes
are really nice. Fluke makes a nice
On 12/14/2011 08:15 PM, Dan Field wrote:
Since it's gone crazy on Scopes around here. I have 3 units and no
clue how to use them nor any accessories. I wanted one just learn some
basics but so far I haven't done that. I bought them with my Mill.
1 ea 2465 DMS
1 ea 2465
1 ea 2245A
On 12/15/2011 02:08 AM, Peter Blodow wrote:
Gene,
when I was studying physics back in the 60ies and 70ies, the labs of the
Technical University of Munich were full of Tek 525's, 545's etc.
Earning some extra money during study time at Siemens labs, I found the
same models there. Even at this
On 12/15/2011 05:35 AM, emc-users-requ...@lists.sourceforge.net wrote:
was thinking about this what if one was to attach a synchronus steppe as an
encoder one could under drive it ( incresed sensivity,and resolution), put
current limiting resistors inline (10 k ohm?) and opt isolate to
On 15 December 2011 14:06, kqt4a...@gmail.com wrote:
For example how to define a 1/8 ball nose mill
If you want to automatically compensate for the ball-radius then I am
afraid that you can't. EMC2 doesn't know enough about the material
shape to compensate for ball-nose (or V) cutters. All
On 15 December 2011 14:20, cogoman cogo...@optimum.net wrote:
Does anybody think a somewhat universal encoder file in .EPS format
would make a good addition to the wiki?
I have been using this one here:
http://fennetic.net/pub/irc/encoder-panelized.ps
Which is nicely commented and so
On Thursday, December 15, 2011 11:04:59 AM Peter Blodow did opine:
Gene,
when I was studying physics back in the 60ies and 70ies, the labs of the
Technical University of Munich were full of Tek 525's, 545's etc.
Earning some extra money during study time at Siemens labs, I found the
same
On Thursday, December 15, 2011 11:38:27 AM cogoman did opine:
On 12/15/2011 05:35 AM, emc-users-requ...@lists.sourceforge.net wrote:
was thinking about this what if one was to attach a synchronus steppe
as an encoder one could under drive it ( incresed sensivity,and
resolution), put
On 12/15/2011 6:27 AM, andy pugh wrote:
On 15 December 2011 14:06,kqt4a...@gmail.com wrote:
For example how to define a 1/8 ball nose mill
If you want to automatically compensate for the ball-radius then I am
afraid that you can't. EMC2 doesn't know enough about the material
shape to
Dan,
I don't know if you are going to get much discussion here on this
fundamental topic. Your question is so complicated that it is usually answered
in CNC classrooms or CNC books with lots of diagrams. A text based forum is a
poor substitute for these. As far as You Tube is
On Thu, 15 Dec 2011, James Louis wrote:
Dan,
I don't know if you are going to get much discussion here on this
fundamental topic. Your question is so complicated that it is usually
answered in CNC classrooms or CNC books with lots of diagrams. A text based
forum is a poor
On Thursday, December 15, 2011 05:35:47 PM Richard Ray did opine:
On Thu, 15 Dec 2011, James Louis wrote:
Dan,
I don't know if you are going to get much discussion here on
this fundamental topic. Your question is so complicated that
it is usually answered in CNC
On 15 December 2011 21:00, Dan Field danfi...@roadrunner.com wrote:
So now I wonder why there is even a Tool Crib in EMC?
It has a number of uses. The main one is tool-length compensation. You
can change tool and the tip of the tool is still at the XYZ that the
screen says it is at. (or the XZ
Are you burning the live CD to disk or USB stick just as you might do a text
or picture file? If so you might want to google iso burner (there are free
ones which work very well). Just copying and pasting the files to a USB stick
or CD will not make it bootable
Martin
To:
Even though EMC2 does not directly use all of the information available in
a tool crib list a complete description of the cutter is valuable to the
machinist running the machine. I have seen as many as four 1/2 inch
diameter X 1.25 4 flute end mills used in one program. The only difference
is the
19 matches
Mail list logo