Re: [Emc-users] Camera is on & working

On Thu, 28 Nov 2013 18:10:25 -0500, Gene Heskett wrote: > On Thursday 28 November 2013 17:31:26 Frederic RIBLE did opine: > > > Can I specify that SUBROUTINE_PATH twice? > I do not know. > HALUI] > MDI_COMMAND=ocall > MDI_COMMAND=ocall > MDI_COMMAND=ocall > MDI_COMMAND=ocall > MDI_COMMAND=o<_

Re: [Emc-users] 3D scanner !!!???

On 11/28/2013 3:29 AM, andy pugh wrote: > How about free? > http://www.123dapp.com/catch > > (note, I haven't actually got this to work on my phone) Still no Android version. -- Rapidly troubleshoot problems before they

[Emc-users] Fanuc 7M manual

All I ask is that everyone doesn't die rolling on the floor laughing. There might be someone out there that could use this. Please respond promptly; else it goes in the trash. The cost is that of mailing it; probably media mail. I'll consult my local media specialist. ;-) This is the operator

Re: [Emc-users] Camera is on & working

On Thursday 28 November 2013 17:31:26 Frederic RIBLE did opine: > Le 2013-11-28 22:41, Gene Heskett a écrit : > > So obviously the SUBROUTINE_PATH isn't working, and the MDI > > enumeration is screwed. > > Yes, you have the two problems in your config. > > Here are some parts of my CNC-6040.ini

Re: [Emc-users] Camera is on & working

Le 2013-11-28 22:41, Gene Heskett a écrit : > So obviously the SUBROUTINE_PATH isn't working, and the MDI > enumeration is screwed. Yes, you have the two problems in your config. Here are some parts of my CNC-6040.ini file --- [RS274NGC] PARAMETER_FILE = linuxcnc.var SUBROUTINE_PATH = nc_subro

Re: [Emc-users] Camera is on & working

0 Z0 D0.04 ;a #58 drill T10 P10 X0 Y0 Z0 D0.0625 ;a .0625 2 fl end mill T11 P11 X0 Y0 Z0 D0.0312 ;added 20130917 T12 P12 X0 Y0 Z0 D0.0015 ;Added 20130918 T99 P99 x-0.1 Y-0.05 Z0 D0.0001;test of camview-emc, added 20131128 The latter to give a small motion I could see, but not far enough to hurt any

Re: [Emc-users] 3D scanner !!!???

Le 2013-11-28 03:55, a k a écrit : > how to convert STL file into other useful format? > I know several tools able to do that: - CamBam - Deskproto - BobCAD-CAM - Mecsoft FreeMill - Vectric Cut3D CamBam is not able to handle four axis easily (you can do indexed, but that is tricky), but the pri

Re: [Emc-users] Camera is on & working

Le 2013-11-28 12:33, Gene Heskett a écrit : > On Thursday 28 November 2013 06:13:27 Frederic Rible did opine: > > And just to maintain camera focus, should not restore it to the > starting height at the end of that motion? This camera does however > seem to be autofocus over about a 1.5" range o

Re: [Emc-users] Check pix

On Thursday 28 November 2013 06:51:41 David Armstrong did opine: > On 28/11/13 11:08, Gene Heskett wrote: > > Greetings to all on an early morning of Thanksgiving day; > > > > Just to make sure I've not screwed the moose since I've been pretty > > good at that, I have placed a screenshot of linux

Re: [Emc-users] Camera is on & working

On Thursday 28 November 2013 06:13:27 Frederic Rible did opine: > On Wed, 27 Nov 2013 21:14:58 -0500, Gene Heskett > > wrote: > > So, the next question is, what file do I put that offset pair into, > > and what buttons do I click to tell LinuxCNC to reference those > > offsets when > > > > sett

Re: [Emc-users] Check pix

On 28/11/13 11:08, Gene Heskett wrote: > Greetings to all on an early morning of Thanksgiving day; > > Just to make sure I've not screwed the moose since I've been pretty good at > that, I have placed a screenshot of linuxcnc working with camview-emc at > >

[Emc-users] Check pix

Greetings to all on an early morning of Thanksgiving day; Just to make sure I've not screwed the moose since I've been pretty good at that, I have placed a screenshot of linuxcnc working with camview-emc at Can someone familiar with it tell me if I ha

Re: [Emc-users] 3D scanner !!!???

How about free? http://www.123dapp.com/catch (note, I haven't actually got this to work on my phone) -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Rapidly troubleshoot problems before

Re: [Emc-users] 3D scanner !!!???

On 11/27/2013 8:28 PM, Gene Heskett wrote: > On Wednesday 27 November 2013 22:24:46 a k did opine: > >> hi >> i found new 3d scanner http://cubify.com/sense/ >> problem is that file output STL from that scanner. > > That is not its only problem, very low resolution, 240 wide by 320 high is > the re

Re: [Emc-users] Camera is on & working

On Wed, 27 Nov 2013 21:14:58 -0500, Gene Heskett wrote: > > So, the next question is, what file do I put that offset pair into, and > what buttons do I click to tell LinuxCNC to reference those offsets when > setting up to "etch" the top of a board? > Hello Gene, You need to set the offset i

Re: [Emc-users] Emc-users@lists.sourceforge.net

> - There are two STL to GCODE converter programs in the Windows side of > things: >- - Skeinforge >- - Slic3r Slic3r runs on linux too. -- Rapidly troubleshoot problems before they affect your business. Most