I just found this on YouTube
https://www.youtube.com/watch?v=qoV8UXtLYmE
I though that the inability of LinuxCNC to rewind a path would be a
problem, but it appears to be working.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
Andythose machine are pretty cheap
moly wire and yes, they dont back up even with their own control.
notice the un-constant feed. thats the edm-servo loop racing to get back
to the correct gap position. This is an example of catch-up edm.
Instead of being in the right place, it cuts slower,
I have an old Sodick wire EDM I should give a try at home, it never booted
properly probably because a problem with the discettes.
On Fri, 7 Aug 2015 10:40:08 +0100
andy pugh bodge...@gmail.com wrote:
I just found this on YouTube
https://www.youtube.com/watch?v=qoV8UXtLYmE
I though that
On Friday 07 August 2015 05:40:08 andy pugh wrote:
I just found this on YouTube
https://www.youtube.com/watch?v=qoV8UXtLYmE
I though that the inability of LinuxCNC to rewind a path would be a
problem, but it appears to be working.
I assume the wire, since it also is being sacrificed, is a
I have an old Sodick wire EDM I should give a try at home, it never booted
properly probably because a problem with the discettes.
On Fri, 7 Aug 2015 10:40:08 +0100
andy pugh bodge...@gmail.com wrote:
I just found this on YouTube
https://www.youtube.com/watch?v=qoV8UXtLYmE
I though that
Nice! Here is one of the behind the scenes shots for it:
https://www.youtube.com/watch?v=3zSU6g8I9W4
On Fri, Aug 7, 2015 at 4:40 AM, andy pugh bodge...@gmail.com wrote:
I just found this on YouTube
https://www.youtube.com/watch?v=qoV8UXtLYmE
I though that the inability of LinuxCNC to rewind
You could take a look and use spindle-override pins
taras.korol...@openmailbox.org Wrote in
message:
Hi dear users and developers of one of the greatest software that I have
ever been used in my life.
Currently my spindle speed is controlled using pwmgen component.
So I have a connection
Wow that was cool. I like the cigarette at the end with the gear next to
it. Looks like a spot welder arm, but not.
--
Message: 5
Date: Fri, 7 Aug 2015 10:40:08 +0100
From: andy pugh bodge...@gmail.com
Subject: [Emc-users] Wire EDM
To: Enhanced Machine
Some pictures here: http://kamar-cnc.pl/?page_id=1179
On Fri, Aug 7, 2015 at 4:10 PM, Mark Johnsen m...@ijohnsen.com wrote:
Wow that was cool. I like the cigarette at the end with the gear next to
it. Looks like a spot welder arm, but not.
--
Message: 5
I am out of the office until 24.08.2015.
Note: This is an automated response to your message Emc-users Digest, Vol
112, Issue 9 sent on 07.08.2015 23:27:54.
This is the only notification you will receive while this person is away.
10 matches
Mail list logo