On Sunday 01 November 2015 19:28:20 andy pugh wrote:
> On 2 November 2015 at 00:22, Gene Heskett wrote:
> > I can see sim>axis>vismach> but vmc_toolchange doesn't appear to be
> > a legit startup option.
>
> There are two sub-configs in there.
Found it! That is a quite simplified version that a
On 2 November 2015 at 00:22, Gene Heskett wrote:
> I can see sim>axis>vismach> but vmc_toolchange doesn't appear to be a
> legit startup option.
There are two sub-configs in there.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
---
On Sunday 01 November 2015 18:41:30 andy pugh wrote:
> On 1 November 2015 at 00:56, Gene Heskett wrote:
> > Where can I get the source Andy?
>
> The source is in the usual place, git.linuxcnc.org
> http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob_plain;f=src/hal/c
>omponents/carousel.comp;hb=
On 1 November 2015 at 00:56, Gene Heskett wrote:
> Where can I get the source Andy?
The source is in the usual place, git.linuxcnc.org
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob_plain;f=src/hal/components/carousel.comp;hb=HEAD
> What I have in mind will take quite some interaction betw
This bugfix release addresses an important bug in canned cycle
preliminary motion, plus some other minor stuff. All users are
encouraged to upgrade.
--
Sebastian Kuzminsky
--
___
A new bugfix release in the 2.7 stable series is out. This one
primarily fixes an old, old bug in canned cycle preliminary motion. All
users are encouraged to upgrade.
--
Sebastian Kuzminsky
--
On Saturday 31 October 2015 23:40:41 Jon Elson wrote:
> On 10/31/2015 10:15 PM, Gene Heskett wrote:
> > I have 3, 8 wire motors, I presume intended for direct 24 volt
> > operation since the coil ohms is 145, and the current/phase matched
> > that at 166 mills per coil.
>
> Ugh, these motors will