On Sunday 01 November 2015 18:41:30 andy pugh wrote: > On 1 November 2015 at 00:56, Gene Heskett <[email protected]> wrote: > > Where can I get the source Andy? > > The source is in the usual place, git.linuxcnc.org > http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob_plain;f=src/hal/c >omponents/carousel.comp;hb=HEAD > > > What I have in mind will take quite some interaction between the > > machine and this component. > > Take a look at the carousel demo sim config. That builds a conplete > sequence with G-code and the carousel component. The demo also > includes spindle orientation and a Vismach model. > > sim->axis->Vismach->vmc_toolchange
I can see sim>axis>vismach> but vmc_toolchange doesn't appear to be a legit startup option. So how do I run that demo? Keeping in mind that I have shuffled some stuffs around in my sim axis setup here in order to simulate probe contacts for the G38.2 command. I also tried it on the machine that will need it, with the same results, nothing in the vismach tree is executable. I am no doubt missing the point. :( Thanks Andy Thanks Andy. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
