Thank you Chris and Andy,
I read about G93, and rewrite my gcode program, in a way, that I assume I
want to have G1 speed 700mm/min.
So for each segment I have I calculate F value for G93 with formula:
g93feed = g1Speed / length_of_segment
I rerun program in simulation this time using halscope
> > Does anybody here have any experince of the data in the parametrization
> > frame for profibus?
>
>
> All information needed for the SetPrm usually is stored in the GSD file.
> So you just need to know your configuration and select the right data
> from the GSD.
> But there is one important
> Hello Nicklas,
>
> On 08/17/16 00:40, Nicklas Karlsson wrote:
> > I have tried to use voltage to control EDM gap distance but are not sure
> > this is the correct method. I found a paper there someone suggested gap
> > resistance is a non linear function of gap distance.
> the gap resistance
On 21 August 2016 at 14:42, Klemen Živkovič wrote:
> I read about G93, and rewrite my gcode program, in a way, that I assume I
> want to have G1 speed 700mm/min.
You might find this interesting: https://www.youtube.com/watch?v=d0ffiCekhpE
--
atp
"A motorcycle is a bicycle with a pandemonium at
Thank you Andy - interesting video I looked all of it - but I couldn't
find out where I made mistake - I mean - I understand what guy is saying in
video, and I think that formula I wrote still holds -
g93feed = g1Speed / length_of_segment
- or I am mistaken?
however I cannot find place for arc
2016-08-11 16:12 GMT+03:00 Klemen Živkovič :
> What is needed is constant speed over surface - but surface is moving in my
> example.
>
> Do i need to bring up feed rate when pipe rotates to simulate constant
> speed over surface?
>
I looked at your G-code and simulation.
Actually while the pipe
Oh yes I see how you calculate it for this example on simulation.
Actually I would need to make and calculate it for general case where
fillet can be only quarter of length or any other arbitrary length. I get
line segments from 3d cad program.
Need to think if calculation of g93 feed is possible
On Saturday 20 August 2016 19:33:26 Gene Heskett wrote:
> On Friday 19 August 2016 23:16:47 Gene Heskett wrote:
>
> Had to quit for much of the rest of the weekend, need some steel, and
> TSC doesn't satisfy my hunger with their crappy hot roll.
>
> But I've a question, based on what I know about
Hello Nicklas,
On 08/21/16 23:08, Nicklas Karlsson wrote:
Hello Nicklas, On 08/17/16 00:40, Nicklas Karlsson wrote:
>>> I have tried to use voltage to control EDM gap distance but are not sure
>>> this is the correct method. I found a paper there someone suggested gap
>>> resistance is a non