> The DYN4 can run in analogue-controlled velocity mode. That might be
> worth considering.
> It probably doesn't work any better than running the loop in the
> drive, but it is easier to see what the loop is doing.
>
> (Actually, it might also work better, as there is the possibility of
> using v
Look on the back of the keyboard for microchips, or on a board that the
keyboard connects to. Google the numbers to see what they are.
I'd thought about hoking up the keyboard from the Anilam Crusader 2 system that
was on my big mill. Shouldn't have been too difficult since a cable went from
th
On Tue, 11 Oct 2016, Erik Friesen wrote:
Date: Tue, 11 Oct 2016 19:06:33 -0400
From: Erik Friesen
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Haas thoughts
So how does the drive know how much pwm to give the motors? Or t
So how does the drive know how much pwm to give the motors? Or that
depends on the a and b levels in that case?
On Tue, Oct 11, 2016 at 6:56 PM, Erik Friesen wrote:
> That is the pinout between the control and the drive. The drive doesn't
> have any direct encoder input.
>
> On Tue, Oct 11, 20
That is the pinout between the control and the drive. The drive doesn't
have any direct encoder input.
On Tue, Oct 11, 2016 at 6:33 PM, andy pugh wrote:
> On 11 October 2016 at 23:24, Erik Friesen wrote:
> > omehow these amps have to figure power and
> > location for the bldc phase,
>
> Is tha
On Tue, 11 Oct 2016, Erik Friesen wrote:
> Date: Tue, 11 Oct 2016 18:24:36 -0400
> From: Erik Friesen
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: Greg Bentzinger ,
> "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Haas thoughts
>
> The pinout coming from the
On 11 October 2016 at 23:24, Erik Friesen wrote:
> omehow these amps have to figure power and
> location for the bldc phase,
Is that the pinout between the motors and the drive? Or is it the
control signal to the drive?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
desi
The pinout coming from the brushless amps is
610-1 +A CHANNEL
610-2 ANALOG GROUND
610-3 +B CHANNEL
610-4 ANALOG GROUND
610-5 ENABLE
610-6 LOGIC GROUND
610-7 FAULT
610-8 LOGIC GROUND
610-9 NOT USED
610-10 SHIELD/ANALOG GROUND
Any ideas what signal levels and types those will be? The encoders feed
My haas is a 1996 and it shows. Attempting 0.1" engraving at 40ipm G187
E.001 doesn't work, and I think it is a control limitation. See two paths
in this pic? aercon.net/Public/Engraving.jpg The top is attempted at 40
IPM, the bottom at 15. To me it looks like a trajectory planning
limitation.
Perspective on anything read on cnccookbook.com
Keep in mind that site exists to promote his software and his articles are
written by someone who does not have long term (if any) experience with "Big
Iron" in an industrial business environment.
His opinions are biased towards the hobby/semi-pro
On 10/11/2016 03:19 AM, linden wrote:
> hello all,
>
> I need some help and suggestions on interfacing dmm dyn4 servo
> driver with Linuxcnc
http://www.dmm-tech.com/Dyn4_main.html
LinuxCNC has all the features you need for servo control built-in, you
really just need a dumb motor driver, t
I would have said it was more incorrect and misleading than out of date.
And the fellows claim of DNC as being a "feature" is laughable. I work with
Fanuc controls all day, DNC isn't a "feature" it is a band-aid work-around for
the controls limited memory, and a huge pain in the ass to have to
If you look at the comments - Seb counters almost all of his points ;)
sam
On 10/11/2016 8:33 AM, Dave Caroline wrote:
> That is very out of date, LinuxCNC having branching etc in the gcode
> as well as rigid tapping, read the docs for real info not random
> websites
>
> Dave Caroline
>
> ---
That is very out of date, LinuxCNC having branching etc in the gcode
as well as rigid tapping, read the docs for real info not random
websites
Dave Caroline
--
Check out the vibrant tech community on one of the world's mo
Are any of these items valid any more?
http://blog.cnccookbook.com/2014/12/16/10-features-pros-hobby-cnc-controllers-dont/
What would it take (software wise) to fully integrate a haas keypad so that
most of the functions would be usable? The ones I see as a challenge are
items like Posit, Offset
On 11 October 2016 at 11:19, linden wrote:
> current plan for linear axis
>
> - Run the servo in position mode
>
> - Feed the servo drive a step and direction signal from linuxcnc let
> the drive do its magic with its own pid loop.
The DYN4 can run in analogue-controlled velocity mode. That mig
hello all,
I need some help and suggestions on interfacing dmm dyn4 servo
driver with Linuxcnc
At the moment I have 4 liner axis bellow is a rough outline of what i
have in mind. My 2 questions are:
Dose this make sense or is there a better way to do this? (am I
completely out to lunch)
On Tuesday 11 October 2016 03:49:03 Erik Christiansen wrote:
> On 10.10.16 09:58, Gene Heskett wrote:
> > Where are you that the weather took such a serious swipe at you?
>
> In the Dandenong ranges, at an altitude of 600', on the outskirts of
> Melbourne, Victoria. (38°S)
So you are almost exact
On 10.10.16 09:58, Gene Heskett wrote:
>
> Where are you that the weather took such a serious swipe at you?
In the Dandenong ranges, at an altitude of 600', on the outskirts of
Melbourne, Victoria. (38°S) The 120 km/h winds are not so common here;
the last time I experienced them was 27 years ago
19 matches
Mail list logo