Re: [Emc-users] found a harmonic drive set of .stl's on thingiverse

On Sunday 16 August 2020 21:33:29 Bruce Layne wrote: > On 8/16/20 8:40 PM, Gene Heskett wrote: > > And it ran about 5 minutes, broke the cup of the flexgear off at the > > disk junction. Only 1.2mm thick there, concentrating the wall flex > > into that relatively sharp corner. Can I fix that in cu

Re: [Emc-users] found a harmonic drive set of .stl's on thingiverse

On 8/17/20 3:52 AM, Gene Heskett wrote: > This one is printing at the same scale as the output shaft, which I just > remade after finding they were to big to enter the main bearing even with > help from the assembly screws. So this will have a smaller bore, which means > I'll have to make a s

Re: [Emc-users] found a harmonic drive set of .stl's on thingiverse

On Monday 17 August 2020 05:21:28 Bruce Layne wrote: > On 8/17/20 3:52 AM, Gene Heskett wrote: > > This one is printing at the same scale as the output shaft, which I > > just remade after finding they were to big to enter the main bearing > > even with help from the assembly screws. So this will

Re: [Emc-users] found a harmonic drive set of .stl's on thingiverse

"TPU" has a wide range of properties depending on the brand. This is good because you can match it to what you need from very soft to a kind of hard rubber. It is harder to print and not the best for Bowden tube printers. It is like trying to push a rubber band dow the tube. My printer has th

[Emc-users] ISO file for Mesa 7i96?

Hello! I was going to get ISO file with 2.7.14 version for a machine that has Mesa 7i96 board. I opened the downloads page and then hit the reverse, when saw this sentence:"This is compatible with Mesa PCI and PCIe and Pico interface boards but is not compatable with Mesa Ethernet interface boards

Re: [Emc-users] ISO file for Mesa 7i96?

You want the LinuxCNC Uspace 2.7.0 Debian 9 Stretch (for ethernet boards you need uspace - not rtai) On Mon, Aug 17, 2020 at 3:21 PM Viesturs Lācis wrote: > Hello! > > I was going to get ISO file with 2.7.14 version for a machine that has >

Re: [Emc-users] ISO file for Mesa 7i96?

On Mon, 17 Aug 2020 at 21:21, Viesturs Lācis wrote: > Is there some ISO file that I could > use? Actually-released 2.7.14 (?) version that is compatible: http://www.linuxcnc.org/testing-stretch-rtpreempt/linuxcnc-stretch-uspace-amd64.iso Very-nearly-released 2.8.x version: https://www.linuxcnc

Re: [Emc-users] ISO file for Mesa 7i96?

> From: andy pugh [mailto:bodge...@gmail.com] > On Mon, 17 Aug 2020 at 21:21, Viesturs Lacis wrote: > > > Is there some ISO file that I could > > use? > > Actually-released 2.7.14 (?) version that is compatible: > http://www.linuxcnc.org/testing-stretch-rtpreempt/linuxcnc-stretch-uspace-amd64.i

Re: [Emc-users] ISO file for Mesa 7i96?

On Mon, 17 Aug 2020 at 22:05, John Dammeyer wrote: > So what possible reason would there be to upgrade to 2.8.x when there's a > final release? It's new and shiny? This is an abridged changelog: https://github.com/LinuxCNC/linuxcnc/blob/v2.8.0-pre2/debian/changelog -- atp "A motorcycle is

Re: [Emc-users] ISO file for Mesa 7i96?

> From: andy pugh [mailto:bodge...@gmail.com] > On Mon, 17 Aug 2020 at 22:05, John Dammeyer wrote: > > > So what possible reason would there be to upgrade to 2.8.x when there's a > > final release? > > It's new and shiny? That's way more than new and shiny. Although I think I'll wait until th

Re: [Emc-users] setting tool length offsets

I went back through my steps to solve my problem, and found that the documentation for 2.9.0 pre does not show this new way of doing it. --J. Ray Mitchell Jr. jrmitche...@gmail.com (818)324-7573 "Good enough is the enemy of excellence"author unknown On Sun, Aug 16, 2020 at 7:35 PM jrmitchellj