On Sat, 31 Oct 2020 at 20:48, Gene Heskett wrote:
> Yes Jon, r1 does not equal r2. Gawd I wish that error window was
> copy/pastable. The code straight out of counterbore.py has exactly the
> same error.
G90 / G91 and G90.1 / G91.1 need to match the assumptions of the G-code.
--
atp
"A motorcy
On Sunday 01 November 2020 05:59:13 andy pugh wrote:
> On Sat, 31 Oct 2020 at 20:48, Gene Heskett
wrote:
> > Yes Jon, r1 does not equal r2. Gawd I wish that error window was
> > copy/pastable. The code straight out of counterbore.py has exactly
> > the same error.
>
> G90 / G91 and G90.1 / G91.1
Hi,
I have a application for a 7i37/ 7i33. In face a couple of them.
First try has been a D525 with a SIIG single pport.
First off I have no idea if the SIIG board works and indeed no idea of
how to test it.
With Jon's ppmc there was a comm program that told one right away if the
link was work
On Sun, 1 Nov 2020 at 16:02, dave engvall wrote:
> I have a application for a 7i37/ 7i33. In face a couple of them.
> First try has been a D525 with a SIIG single pport.
Do you really mean 7i37? Or maybe 7i43?
> First off I have no idea if the SIIG board works and indeed no idea of
> how to tes
On Sun, 1 Nov 2020 at 04:43, andrew beck wrote:
> On a 7i76 the 0_10v is isolated from the Mesa card I think. Is a 7i77
> similar? I just a bit cagy about connecting up electrically to the VFD
> inputs. As I don't want to blow anything.
I don't know. PCW would know.
> I'm still struggling to
On 11/01/2020 10:18 AM, andy pugh wrote:
First off I have no idea if the SIIG board works and indeed no idea of
how to test it.
If it shows up in lspci as a parallel port card that's a good start.
Does it have a Moschip chip? Those generally work.
SIIG parallel ports used to be my universal E
On 11/1/20 10:30 AM, andy pugh wrote:
On Sun, 1 Nov 2020 at 04:43, andrew beck wrote:
On a 7i76 the 0_10v is isolated from the Mesa card I think. Is a 7i77
similar? I just a bit cagy about connecting up electrically to the VFD
inputs. As I don't want to blow anything.
I don't know. PCW wou
On Sun, 1 Nov 2020 at 19:12, Ed wrote:
> Where would a Mesa SpinX1 or a Pico Spindle DAC fit in here?
The Spin1X is (as I understand it) basically the PWM-to-Analog stage
from a Mesa card as a standalone board.
(The 7i76 spindle out does _not_ use PWM, that's a smart-serial digital signal.
--
On 11/1/20 8:18 AM, andy pugh wrote:
On Sun, 1 Nov 2020 at 16:02, dave engvall wrote:
I have a application for a 7i37/ 7i33. In face a couple of them.
First try has been a D525 with a SIIG single pport.
Do you really mean 7i37? Or maybe 7i43?
First off I have no idea if the SIIG board wor
7i37 is a daughter card and can't be flashed.
On Sun, Nov 1, 2020 at 3:03 PM dave engvall wrote:
>
>
> On 11/1/20 8:18 AM, andy pugh wrote:
> > On Sun, 1 Nov 2020 at 16:02, dave engvall wrote:
> >
> >> I have a application for a 7i37/ 7i33. In face a couple of them.
> >> First try has been a D
On 11/01/2020 12:46 PM, Ed wrote:
On 11/1/20 10:30 AM, andy pugh wrote:
On Sun, 1 Nov 2020 at 04:43, andrew beck
wrote:
On a 7i76 the 0_10v is isolated from the Mesa card I
think. Is a 7i77
similar? I just a bit cagy about connecting up
electrically to the VFD
inputs. As I don't want to
On Sunday 01 November 2020 11:00:23 dave engvall wrote:
> Hi,
> I have a application for a 7i37/ 7i33. In face a couple of them.
> First try has been a D525 with a SIIG single pport.
> First off I have no idea if the SIIG board works and indeed no idea of
> how to test it.
>
> With Jon's ppmc ther
Greetings all doc writers;
Needing to use the G83 peck drilling cycle today since I was drilling a
4.3mm hole clear thru a 1" thick slab of alu, I looked it up but found a
puzzle, and it worked without using the L option, which I could not find
even in the prior pages that were referenced.
So
Middle of afternoon and I still need coffee. ;-) Let's try 7i43. Tnx.
On 11/1/20 12:16 PM, Eric Keller wrote:
7i37 is a daughter card and can't be flashed.
On Sun, Nov 1, 2020 at 3:03 PM dave engvall wrote:
On 11/1/20 8:18 AM, andy pugh wrote:
On Sun, 1 Nov 2020 at 16:02, dave engvall wr
On Sun, 1 Nov 2020, dave engvall wrote:
Date: Sun, 1 Nov 2020 15:16:06 -0800
From: dave engvall
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] EPP
Middle of afternoon and I still need coffee. ;-) Let's try 7i43. Tnx.
The 7I43 f
> On 1 Nov 2020, at 22:53, Gene Heskett wrote:
>
> So what does the L option do?
It allows you to repeat the cycle.
Described in the canned cycle intro.
http://linuxcnc.org/docs/2.8/html/gcode/g-code.html#gcode:g80-g89
___
Emc-users mailing list
On Sunday 01 November 2020 20:28:00 Andy Pugh wrote:
> > On 1 Nov 2020, at 22:53, Gene Heskett wrote:
> >
> > So what does the L option do?
>
> It allows you to repeat the cycle.
>
> Described in the canned cycle intro.
>
> http://linuxcnc.org/docs/2.8/html/gcode/g-code.html#gcode:g80-g89
And is
17 matches
Mail list logo