Hi Jon,
> -Original Message-
>
> On 03/24/2021 10:18 PM, John Dammeyer wrote:
> >
> >
> > However this page I think shows how you create the G code command as a MDI
> > command.
> > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Adding_Custom_MDI_Buttons
> >
> Thanks very much for the link!
On 03/24/2021 10:18 PM, John Dammeyer wrote:
However this page I think shows how you create the G code command as a MDI
command.
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Adding_Custom_MDI_Buttons
Thanks very much for the link! I got it working with very
little trouble. Push a button, it
Isn't the 403 a microAmp device? Or is it microVolt? Seems like most A/D
would need an external preamp.
Eric Keller
Boalsburg, Pennsylvania
On Fri, Mar 26, 2021 at 6:30 PM Andy Pugh wrote:
>
>
> > On 26 Mar 2021, at 21:39, Peter C. Wallace wrote:
> >
> > he common way would be to get a
On Sat, 27 Mar 2021 at 03:47, Karl Schmidt wrote:
> Looks like these guys make some chips - with datasheets in English!
>
> http://www.ichauschina.com/en/products/interpolator.htm
They are a German company...
https://www.ichaus.de/product/iC-MN
They used to have a Sin/Cos development board
Greetings all;
I'm in a try it mood this morning while I wait for it to warm up enough I
can go move some dirt in the back yard to make a level place to put a
slab of concrete for a small plastic shed I bought to keep my new last
year, rider in out of the weather.
So I've downloaded a bearing
On 03/26/2021 10:44 PM, Karl Schmidt wrote:
On 3/26/21 3:34 PM, Feral Engineer wrote:
Does anyone have a working solution for using Heidenhain
LS403 scales with
LinuxCNC? They're 2 phase sinusoidal feedback. Trying to
connect to a mesa
7i95.
Phil T.
The Feral Engineer
They used to build
