On Tuesday 23 November 2021 21:33:21 John Dammeyer wrote:
> Still wondering how I might make the spindle turn slowly and then stop
> on a sensor signal. From the HAL file it's set up the same way as the
> XYZA axis with respect to step_type and control-type.
>
> I'd want to set the velocity to sa
Still wondering how I might make the spindle turn slowly and then stop on a
sensor signal. From the HAL file it's set up the same way as the XYZA axis
with respect to step_type and control-type.
I'd want to set the velocity to say 30 RPM (0.5 RPS) and during a revolution if
it detects an inp
Not this one.
> -Original Message-
> From: Thaddeus Waldner [mailto:thadw...@gmail.com]
> Sent: November-23-21 12:01 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Spindle positioning.
>
> Some of those hammers have a thru-hole for pinning the socket.
>
> > On Nov
Some of those hammers have a thru-hole for pinning the socket.
> On Nov 23, 2021, at 1:14 PM, John Dammeyer wrote:
>
> I've ordered a retaining ring set for it. May help. The socket has a recess
> for this ring to expand into but at the moment it almost falls out by itself.
> The wrench is
On Tuesday 23 November 2021 14:14:23 John Dammeyer wrote:
> I've ordered a retaining ring set for it. May help. The socket has a
> recess for this ring to expand into but at the moment it almost falls
> out by itself. The wrench is 10 years old and although not used
> during that period the rub
The socket doesn't have a groove and it's very heavy. The wrench uses a
retaining ring like in this video
https://youtu.be/8RmhBd1wcEA
but I don't think there's a rubber Oring underneath it.
I'll report back once the 12 point arrives. The 6 point is useless for the
other reasons I've mention
On Tuesday 23 November 2021 02:47:59 andy pugh wrote:
> On Tue, 23 Nov 2021 at 01:05, John Dammeyer
wrote:
> > Likely why the set screw works loose after a number of cycles.
>
> I am surprised that the air wrench doesn't have the usual ball-detente
> to retain the socket.
I have seen some tha
> From: andy pugh [mailto:bodge...@gmail.com]
>
> On Tue, 23 Nov 2021 at 01:05, John Dammeyer wrote:
>
> > Likely why the set screw works loose after a number of cycles.
>
> I am surprised that the air wrench doesn't have the usual ball-detente
> to retain the socket.
>
> --
> atp
It has
