On Mon, 4 Jul 2022 at 05:55, Roland Jollivet wrote:
>
> If the noise is from the belt whipping, then lightly press a rod, or two,
> on the back of the belt to see the effect on the noise
If you have a 3D printer, you could try making a floating tensioner:
https://www.roll-ring.com/?lang=en
--
On 7/4/22 05:10, andy pugh wrote:
On Mon, 4 Jul 2022 at 05:55, Roland Jollivet wrote:
If the noise is from the belt whipping, then lightly press a rod, or two,
on the back of the belt to see the effect on the noise
If you have a 3D printer, you could try making a floating tensioner:
https://w
Making a few chuck adaptors for some random chucks we have.. (this one is
on the big size but will come in handy...)
https://www.youtube.com/watch?v=tlEGmAbvuZs
https://electronicsam.com/images/emco/PXL_20220702_233820082.jpg
https://electronicsam.com/images/emco/PXL_20220703_224600927.jpg
htt
On Mon, 4 Jul 2022 at 15:02, gene heskett wrote:
> > https://www.roll-ring.com/?lang=en
> >
> That's a decent idea, but I would not use it anyplace where the additional
> backlash would be detrimental.
It doesn't add any backlash, but nor does it reduce it at all.
--
atp
"A motorcycle is a bic
John Figie
On Mon, Jul 4, 2022 at 9:02 AM gene heskett wrote:
>
>
> Having watched and listened to the movie, I'm of the opinion the tooth
> profile of the belt doesn't match the pulleys. Whether that's from wear, or
> tooth profile miss-match yet to be determined.
I think the belt is pretty new
I have managed to get two AMC 30A20 servo amps on eBay, one
relatively cheap, the other somewhat expensive. Now, I need
a 3rd. These are 30A peak 15 A continuous, up to 180 V DC
input.
These match the current specs of the NC400's that came with
the machine. But, for the Z axis, maybe less
If it quiets down with pressure applied to the back of the belt, something
like this might do the trick.
NewYall Serpentine Accessory - Tensor de correa
|
|
|
| | |
|
|
|
| |
NewYall Serpentine Accessory - Tensor de correa
Tensor de correa de transmisión de accesorios serpentina
|
That's pretty cool!
John
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: July-04-22 2:06 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Clausing NC Spindle drive belt tension and noise.
>
> On Mon, 4 Jul 2022 at 05:55, Roland Jollivet
>
BTW - that is a little 440w spindle motor...
On Mon, Jul 4, 2022 at 9:29 AM Sam Sokolik wrote:
> Making a few chuck adaptors for some random chucks we have.. (this one is
> on the big size but will come in handy...)
>
> https://www.youtube.com/watch?v=tlEGmAbvuZs
>
> https://electronicsam.com/i
On 7/4/22 12:03, John Figie wrote:
John Figie
On Mon, Jul 4, 2022 at 9:02 AM gene heskett wrote:
Having watched and listened to the movie, I'm of the opinion the tooth
profile of the belt doesn't match the pulleys. Whether that's from wear, or
tooth profile miss-match yet to be determined.
I
On Mon, 4 Jul 2022 at 17:04, John Figie wrote:
> > https://www.roll-ring.com/?lang=en
> >
> Andy, That is a nice idea. However in my case I don't think I would
> have clearance.
It could go at the bottom, nearer the drive motor.
The belt on my Holbrook is a rather wide poly-vee. Very quiet. I h
Regarding belt tension. Goal is to get engagement with the minimum amount
of tension. This ensures the bearings on motor and driven pulley shafts
are not overloaded.
I work with very large bearing and or bushed machines. (Crushing
equipment). Standard rule of thumb is 1/64” of deflection per inc
You need t take several steps
1) verify the belt and pulleys have the same tooth profile. They need to
match exactly.
2) if the profile is "square teeth" then yes, these are noisy. Decide if
you want to spend the $$ to change the profile because no amount of
adjustment will make a square tooth s
Indeed! Poly-Vee belts are acceptably quiet but of course then you need
to rig an encoder.
Probably a decent trade off. Available, not too expensive, transfer
power well and seem to last.
Years ago I made both of my pulleys.
Dave
On 7/4/22 10:05 AM, andy pugh wrote:
On Mon, 4 Jul 2022 at 17
14 matches
Mail list logo