I would weld a lathe parting or grooving tool to a round shank at about the
right dia cutter
And away you go.
Easy
On Tue, 16 Aug 2022, 3:23 pm Gregg Eshelman via Emc-users, <
emc-users@lists.sourceforge.net> wrote:
> How thick is it axially? If it's pretty thin it should be sandwiched
> betwee
Hey guys just want to report back!
We got it working.
We had a working 7c80 file that was close and just copied and pasted the
config into a dummy one from pnconf
Worked a treat.
Hey quick question
Does anyone know how to make a desktop Linuxcnc launcher.
I got lost
On Thu, 11 Aug 2022, 7:
On Tue, 16 Aug 2022 at 08:17, andrew beck wrote:
> Does anyone know how to make a desktop Linuxcnc launcher.
I think that there might be a script for that.
http://linuxcnc.org/docs/stable/html/man/man1/linuxcncmkdesktop.1.html
--
atp
"A motorcycle is a bicycle with a pandemonium attachment a
If your config shows up in the Linuxcnc config picker, there is a checkbox at
the bottom of that screen that will automatically create a desktop launcher for
the config you choose and will create one upon startup.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (33
I'm trying to help this poor guy on the forum and ran into an odd stumbling
block.
I'm trying to use Siggen to generate a square wave form and output it to the
analog output of a Mesa 7i77. This is for tuning the current loop on a servo
drive. I set up a simple config to do this, but with the
On Tue, 16 Aug 2022 at 19:45, Todd Zuercher wrote:
> I'm trying to use Siggen to generate a square wave form and output it to the
> analog output of a Mesa 7i77. This is for tuning the current loop on a servo
> drive. I set up a simple config to do this, but with the oscilloscope hooked
> up
Hi guys. Sorry for the late reply and thanks to all for the answers.
I'll try to answer more or less to all in one reply to keep it organized.
The rotor is 125 mm long. Cuts are about 45 mm deep.
I forgot to mention that my universal mill is too small for the job so I'll
be doing this on the lat
Awesome thanks guys
I'll have a look.
On Wed, 17 Aug 2022, 12:03 am Todd Zuercher, wrote:
> If your config shows up in the Linuxcnc config picker, there is a checkbox
> at the bottom of that screen that will automatically create a desktop
> launcher for the config you choose and will create one