I first seen such a device in a book about modern machine shop practices
copyright 1870 something.
Some in action.
http://www.youtube.com/watch?v=AHwHLO-mgao
^^^
Andre' B.
On 10/10/2012 12:44 PM, Matthew Herd wrote:
Andy,
If you are familiar with metal shapers
can load off the Eclipse website. But to me, using Eclipse
is like using a 10 lb sledge hammer to drive a tack - overkill.
The Axis graphics are done in Tcl/TK which is a different language.
There is a lot to learn.
Dave
On 5/15/2010 1:27 PM, Andre' B wrote:
I have Emc from a Live
I have Emc from a Live-CD install now updated to 2.4.0
I would like to try a few modifications to Axis, dealing with the feed
and spindle overrides.
Want to toggle the number keys between feed override, spindle override,
and both. Buy both I mean changing feed and speed to maintain the same
but who cares during a rapid move.
Andre' B.
At 02:31 PM 11/4/2009, you wrote:
2009/11/4 John Kasunich jmkasun...@fastmail.fm
G0 is a rapid traverse move and always goes at the speed determined by
the ini file limits. It is NOT affected by an F value in the g-code.
The F only sets the feed
-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
__
Andre' B.
--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering
code: SFAD
http://p.sf.net/sfu/XcvMzF8H
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
__
Andre' B
.
Please supply a link to descriptions so I can go looking for something
comparable on the European market.
Thanks
Peter Blodow
http://www.mesanet.com/
__
Andre' B.
--
This SF.net email is sponsored
with in aluminum and softer steel but
if you are cutting 60Rc tool steel and you hear that you may as well
just stop and change the cutter because it is done cutting.
__
Andre' B.
--
This SF.net email is sponsored
by the time you add all the extra stuff to make up for their
defects you would have been much farther ahead to have just went with
servos in the first place.
__
Andre' B.
--
Check out the new SourceForge.net
an X and Y tool offset like is common on sinker EDMs.
I have know idea what it would take to implement in EMC.
__
Andre' B.
--
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada
(U10.058 V2.031) in it, and to switch back to the main
spindle (U0.0 V0.0).
__
Andre' B.
--
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without
either format so we are only talking about a few existing old g code
programs. In my opinion the user would be better off rewriting those
programs anyway to take advantage of modern cutters anyway. ;)
__
Andre' B
12 matches
Mail list logo