Hi ,
I could solve the problem , it was not about software or hardware , just I
have to change something in BIOS .
Now machine work nice and perfect .
Regards
Parviz
-Original Message-
From: John Stewart [mailto:alex.stew...@crc.ca]
Sent: Monday, June 25, 2012 4:02 PM
To: Enhanced
)
Subject: Re: [Emc-users] FW: Sherline Mill 5410 and EMC2
On 25 June 2012 04:57, Robot Abzar Team wrote:
> 2- yes I tested the Axis but they didn't move in this test !!
This probably indicates that the drives are not being enabled. Have
you connected any amp-enable pins?
> 3- I wo
b.com
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Sherline Mill 5410 and EMC2
>
> On 06/24/2012 11:00 AM, Robot Abzar Team wrote:
> > I purchased a 5410 cnc-ready with 8760 driver box . and try to make the
> > configuration by myself ,
>
> Is there a reaso
Hi all ,
I purchased a 5410 cnc-ready with 8760 driver box . and try to make the
configuration by myself ,
But after so many setting , the machine don't work , in fact the stepper
motor don't have any reaction to program !
Here I explain what I did exactly :
1- I buy a PC exactl