[Emc-users] hostmot2 stepgen piout

Hi I'm trying to use hostmot2 with mesa5i20. PWM has the same pins on connector as in hal_m5i20 (PWM.00.out is P2.15, PWM.00.DIR is P2.19). I have question about pin numbers for STEPGEN ? Where are their outputs on connectors ? Tomek

Re: [Emc-users] hostmot2 stepgen piout

Jeff Epler pisze: Typical steppinout: IO Connections for P4 Pin#I/OPri. funcSec. funcChan Pin funcPin Dir 1 48 IOPort StepGen 0Step/Table1(Out) 3 49 IOPort StepGen 0Dir/Table2(Out)

Re: [Emc-users] Adlink PCI-8136 card

Yes, of course. Have You got source code from Adlink ? They give source code ,when You sign NDA agreement. Tomek Marco Paolini pisze: I know that EMC doesn't support this card, but I'm thinking about writing driver for it. I'm about to start working on this driver too, are you

[Emc-users] Adlink PCI-8136 card

Hello. What do you think about using Adlink PCI-8136 card with EMC ? link to producer: http://www.adlinktech.com/PD/web/PD_detail.php?cKind=pid=134seq=id=sid= There is no Linux driver, but this card has every things needed for build real servo system. - DAC - ADC - Encoder input - I/O ports

[Emc-users] Using M62 - M65 and m66 codes

Hi I have question about using M codes. How to use M62 - M65 m-codes to set parport pins from program ? In documentation is: /The P-word specifies the digital input number/ How to connect it to parport pins ? how to use M66 to read digital input (pin from parport ) to control program ? with

Re: [Emc-users] Using M62 - M65 and m66 codes

Tomasz Brzozowski pisze: Hi I have question about using M codes. How to use M62 - M65 m-codes to set parport pins from program ? In documentation is: /The P-word specifies the digital input number/ How to connect it to parport pins ? how to use M66 to read digital input (pin from parport

Re: [Emc-users] Abslute g0 move error

Hi Michael and I, we are working together building 3 axis milling machine. Sometimes Michalel is using my email. We are trying to add some functionality to Axis. Like Michalel wrote: I wrote my own procedure to start program form selected vector shortly it move Z to max (Up for safety ), go in

Re: [Emc-users] emc_debug.txt question

Ini file adress: http://pastebin.ca/426840 regards michal - Original Message - From: Michał Geszkiewicz [EMAIL PROTECTED] To: emc-users emc-users@lists.sourceforge.net Sent: Friday, April 06, 2007 11:03 AM Subject: [Emc-users] emc_debug.txt question Hello, I have question about file

[Emc-users] servo driver filter

Hi All I'm also developing servoamplifier for brushless motor. I'm using AtMega8 controller to comutate IGBT's. I use IR2132 to drive IGBT's. I have problem with voltage above 150 Volt. From time to time igbt's and IR2132 blow up. I don't have any filter in output. I use huge capacitors very