On Wednesday 21 November 2012 21:33:16 Scott Hasse did opine:
> I've finally been able to circle back to this, thanks for the feedback.
> I do use pncconf and have the spindle display selected with encoder
> feedback, but it looks to me like the filtered and abs signals are from
> the encoder fee
I've finally been able to circle back to this, thanks for the feedback. I
do use pncconf and have the spindle display selected with encoder feedback,
but it looks to me like the filtered and abs signals are from the encoder
feedback input rather than the motion command output and so not suitable
f
> My problem is that the drive controller has a direction input and a speed
> input and the speed input is 0 to +10V regardless of direction. My
> thinking was that I could just tie the direction pin feeding to the 7i33
> high and wire a different I/O pin to the direction input of the drive and
All-
My Sieg KC4S lathe conversion is moving along, and I have a question about
driving a spindle motor controller using a Mesa 7i33 servo controller.
According to the docs, that daughter card uses sign/magnitude mode , which
will generate 0 to +10V analog out when the direction is positive and 0
