On Feb 19, 2012 6:48 AM, "John Thornton" wrote:
>
> The vises with machined sides are a different model vise designed to be
> mounted on it's side if needed.
>
> http://www.glacern.com/gpv_615
>
> John
>
> On 2/18/2012 9:45 AM, John figie wrote:
> > One difference that I see between the Glacern an
In that case you "need" the swivel...
John
On 2/18/2012 11:24 AM, Mark Cason wrote:
> On 02/18/2012 08:24 AM, charles green wrote:
>> swivel base = ballast
>>
> I don't want the swivel, but my Dad does. He likes to "Borrow" my
> tools, and most of what he does doesn't really need much accu
The vises with machined sides are a different model vise designed to be
mounted on it's side if needed.
http://www.glacern.com/gpv_615
John
On 2/18/2012 9:45 AM, John figie wrote:
> One difference that I see between the Glacern and the Kurt is that the Kurt
> has machined side rails. Also chec
On 02/18/2012 08:24 AM, charles green wrote:
> swivel base = ballast
>
I don't want the swivel, but my Dad does. He likes to "Borrow" my
tools, and most of what he does doesn't really need much accuracy.
--
-Mark
Ne M'oubliez ---Family Motto
Hope for the best, plan for the worst ---
On 02/18/2012 06:28 AM, John Thornton wrote:
> I bought one then a year later bought another one and now they out
> number my other vise 2 to 1. I would buy another one when I need one.
> I have an old swivel but never use it.
>
> John
Everybody I've talked to has had nothing but good things
On 02/18/2012 09:45 AM, John figie wrote:
> One difference that I see between the Glacern and the Kurt is that the Kurt
> has machined side rails. Also check Parlec. They make a similar vise too.
I had been considering a Kurt D688, which is nearly identical in
every aspect, but more money:
On 02/18/2012 08:53 AM, Neil wrote:
> Check out these also. I have one and it works great. FWIW, I've had
> issues with their endmills and collets/holders, but the vise is great.
>
> http://www.shars.com/products/view/8138/4quot_440V_CNC_Milling_Machine_Vise_4quot
>
I was looking at this
One difference that I see between the Glacern and the Kurt is that the Kurt
has machined side rails. Also check Parlec. They make a similar vise too.
--
Virtualization & Cloud Management Using Capacity Planning
Cloud com
Check out these also. I have one and it works great. FWIW, I've had
issues with their endmills and collets/holders, but the vise is great.
http://www.shars.com/products/view/8138/4quot_440V_CNC_Milling_Machine_Vise_4quot
Quoting Mark Cason :
>I'm looking at getting a new mil
swivel base = ballast
--- On Sat, 2/18/12, Mark Cason wrote:
From: Mark Cason
Subject: [Emc-users] Another OT subject. Milling Vise
To: "Enhanced Machine Controller (EMC)"
Date: Saturday, February 18, 2012, 12:40 AM
I'm looking at getting a new milling vise, and
I bought one then a year later bought another one and now they out
number my other vise 2 to 1. I would buy another one when I need one. I
have an old swivel but never use it.
John
On 2/18/2012 2:40 AM, Mark Cason wrote:
> I'm looking at getting a new milling vise, and I'm looking for
> rec
I'm looking at getting a new milling vise, and I'm looking for
recommendations.
Has anybody used the Glacern GSV-690 6" Standard Vise?
http://www.glacern.com/gsv_690
It's going to be used on both on my manual mill, as well as my CNC
mill, and I'm looking at ordering the swivel bas
12 matches
Mail list logo
