There seems to be a rounding error in the Jog Speed: displayed by Axis on start
up.
I have MAX_VELOCITY = 5.0 for all axis
If I set
[TRAJ]
DEFAULT_VELOCITY = 0.1
I get the expected jog speed of 6 in/min and it jogs at about 6 inches a minute
If I set
[TRAJ]
DEFAULT_VELOCITY = 0.3 I get
AXIS uses an logarithmic relationship between the position of the jog
slider and the jog speed in inches per minute. At the left hand side,
the jog speeds are fairly close together (e.g., .001 and .002 in/min)
and at the right hand side the speeds are further apart (e.g., 296 and
300 in/min).
Thanks guys,
I had altered the [TRAJ] MAX_VELOCITY and DEFAULT_VELOCITY a bit, partly
because I read in one of the recent posts that it should be more than
the individual axis MAX_VELOCITY, however, I didn't think I had changed
it so much and it then got pared back until all the axes would run
