just tried, result: http://static.mah.priv.at/public/hm2log.txt
I guess I'll wait until PCW recovers from the snake bite ;)
- Michael
Am 08.04.2014 um 07:53 schrieb Michael Haberler mai...@mah.priv.at:
Andy,
Am 08.04.2014 um 01:46 schrieb andy pugh bodge...@gmail.com:
I have pushed
On 8 April 2014 06:53, Michael Haberler mai...@mah.priv.at wrote:
if I add 'stepgen_width=0' to the above line, the TableXPins (eg 026..029
above) vanish and become IOPorts?
No, if you do that then all the stepgen pins will disappear.
The fix is meant to be transparent, existing configs
Am 08.04.2014 um 10:30 schrieb andy pugh bodge...@gmail.com:
On 8 April 2014 06:53, Michael Haberler mai...@mah.priv.at wrote:
if I add 'stepgen_width=0' to the above line, the TableXPins (eg 026..029
above) vanish and become IOPorts?
No, if you do that then all the stepgen pins will
On 8 April 2014 14:34, Michael Haberler mai...@mah.priv.at wrote:
I just cherry-picked your patch http://goo.gl/lMqYDA since onto machinekit:
Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt hm2: Firmware contains unknown
function (gtag-255)
Apr 8 15:30:15 cnc msgd: 0: hal_lib:14229:rt
I have pushed what I believe to be a fix for this issue to the 2.6 branch.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
--
Put Bad Developers to Shame
Dominate Development with Jenkins
Andy,
Am 08.04.2014 um 01:46 schrieb andy pugh bodge...@gmail.com:
I have pushed what I believe to be a fix for this issue to the 2.6 branch.
thanks for this patch!
just to make sure I understand this right, since I have this issue:
my config line used to read:
loadrt hm2_pci
Andy Pugh has added support for the table mode in the Mesa hardware stepgen to
linuxcnc master. This allows user programmable output pin sequences up to 8
pins wide and 16 states deep. Firmware support for this feature has been
available for many years but the driver did not support table mode
Sorry the affected bit file names are:
MAUROPON.bit
RSST12_8.bit
ST12.bit
SVST2_8.bit
SVST4_4.bit
SVST4_4NA.bit
SVST4_6.bit
SVST4_6NA.bit
SVST4_8.bit
SVST8_3P.vhd
SVST8_4.bit
SVST8_4P.bit
SVST8_8.bit
Peter Wallace
Mesa Electronics
On 6 April 2014 21:43, Peter C. Wallace p...@mesanet.com wrote:
1. You are using any of the above bitfiles
2. You are using the hardware stepgen
3. You are using linuxcnc master
There may be a conflict, and I suggest not using master until the bitfiles are
updated. I plan to update all
On Sunday 06 April 2014 19:08:09 Peter C. Wallace did opine:
Andy Pugh has added support for the table mode in the Mesa hardware
stepgen to linuxcnc master. This allows user programmable output pin
sequences up to 8 pins wide and 16 states deep. Firmware support for
this feature has been
On 7 April 2014 00:15, Gene Heskett ghesk...@wdtv.com wrote:
Now I am truly puzzled Peter. Since we have very capable step/dir drivers
available at quite reasonable prices, I think there needs to be a
justification paper for these modes which would appear be most profligate
in the use of I/O
11 matches
Mail list logo
