I just tried to update my machine (using update manager) with the latest
2.1.5 version and during the install process my machine crashed. Blank
screen, and I couldn't shut the machine down with the off/on switch. I
shut off the power and the machine started the reboot process and when I
On Monday 07 May 2007, Dean Hedin wrote:
Gene, You should find a lighter spring if possible.
I don't think Chris will need the type of probe that you and I have made.
To do a crawling type of probing algorithm they will require a probe
that can side trigger as well.
With a lighter spring, which
Today EMC 2.1.5 is released with the following changes:
* set default gains in sum2 component to one instead of zero, so by default
it sums its inputs
* AXIS: pass ini file name along to POSTGUI_HALFILE
* pickconfig: make keypad enter key work like main enter key - issue OK
* halmeter: fix bug
On Sunday 06 May 2007, Chris Radek wrote:
Today EMC 2.1.5 is released with the following changes:
* set default gains in sum2 component to one instead of zero, so by default
it sums its inputs
* AXIS: pass ini file name along to POSTGUI_HALFILE
* pickconfig: make keypad enter key work like main
On Sun, May 06, 2007 at 09:03:19PM -0400, Gene Heskett wrote:
* fix constraint violation right after a probing move
I don't believe I hit that one, what might the symptoms be?
On steppers, a joint following error. The violation was minor so I
doubt it would have been noticed on a servo
On Sun, May 06, 2007 at 08:36:07PM -0500, Chris Radek wrote:
I've added this to the list of discussion topics planned for the
upcoming CNC workshop (June). We may get a chance to work on it if
there's time and interest. One obstacle is that I don't think we have
a probe among us.
I meant
On Sunday 06 May 2007, Chris Radek wrote:
On Sun, May 06, 2007 at 09:03:19PM -0400, Gene Heskett wrote:
* fix constraint violation right after a probing move
I don't believe I hit that one, what might the symptoms be?
On steppers, a joint following error. The violation was minor so I
doubt it
- Original Message -
From: Gene Heskett [EMAIL PROTECTED]
Subject: Re: [Emc-users] EMC 2.1.5 released
The spring in mine needs about a pound to reach the 0.020 up trip point,
so
that's quite a heavy push in terms of psi at the point considering its
blued
finish I'd rather not damage